VC1812K401R050

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS (Transient Voltage Suppressor) devices provide protection against unacceptably high surges, lightning strikes, and electrostatic discharge (ESD). These devices limit the magnitude of transient voltages by clamping or routing them to a ground or neutral reference voltage. Additionally, they may act as a switch to disconnect or reroute voltages, providing a level of protection not achievable by ordinary components such as resistors and capacitors.

Varistors, MOVs (Metal Oxide Varistors), and TVS diodes are all part of the growing family of TVS devices. Varistors, or Voltage Dependent Resistor (VDR), are transient voltage suppressors that offer protection against over-voltage transients by utilizing a special non-linear voltage dependent resistance. MOVs utilize a metal oxide coating applied to one or more layers of zinc oxide ceramic, and their resistive characteristics provide greater voltage dissipation when exposed to high-energy transients. TVS diodes are a special type of diode that can limit the transients by “clamping” the voltage within certain limits, and also provide a low forward-voltage drop for low voltage or low current applications.

VC1812K401R050 is a TVS varistor designed to protect circuits against high-energy transient voltage levels and lightning strikes. This SMD varistor is a low capacitance transient voltage suppressor designed to safely absorb the high-energy transients to ground while still supporting low capacitance for ESD protection. The ceramic capacitor provides excellent voltage clamping capability and is designed to withstand up to 1000 V of transient energy. It also features low clamping voltage, low capacitance, and high peak current capability.

VC1812K401R050 has a wide application field, perfect for automotive electronics, industrial electronics, and medical systems, etc., which need protection from transients produced by electromagnetic interference (EMI), electrostatic discharge (ESD), and lightning strikes. It can be used for the protection of data and control lines in electronic systems, such as power supplies, circuit boards, communications, and data processing systems.

VC1812K401R050 is a two-terminal device and works when a transient voltage spike is applied to them and it begins to increase the percentage of conduction between the two terminals. This increase in conduction causes the voltage between the terminals of the device to drop and redirect this energy to ground with minimal conductive losses. This procedure reduces the input spikes to a safe level and extends the life of the components.

VC1812K401R050 incorporates a metal oxide varistor coating, which provides superior performance and reliable protection from over-voltage transients. It also provides low capacitance for ESD protection and low clamping voltage, which ensures that the voltage signal is clamped and redirected instead of passing through the device. Furthermore, the VC1812K401R050 is designed with a high peak current capability, allowing it to effectively dissipate high-energy transients without damage to the protected circuit.

In conclusion, the VC1812K401R050 is an excellent choice for applications requiring protection from high-energy transients and lightning strikes. With its versatile application field, low capacitance, low clamping voltage, and high peak current capability, the VC1812K401R050 is a reliable solution for ESD and EMI protection.

The specific data is subject to PDF, and the above content is for reference