VCO-100TC

2nd Harmonic, Typ (dBc):	--
Height:	0.270" (6.86mm)
Size / Dimension:	0.504" Dia (12.80mm)
Package / Case:	TO-8 Style, 4 Lead
Operating Temperature:	--
Phase Noise Typ (dBc/Hz):	--
Power (dBm):	--
Pushing (MHz/V):	--
Icc Max:	--
Series:	VCO
Voltage - Supply:	--
Frequency - Center:	--
Frequency Range:	--
Moisture Sensitivity Level (MSL):	--
Part Status:	Obsolete
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

VCOs (Voltage Controlled Oscillators)

Voltage Controlled Oscillators, or VCOs for short, are electronic circuits that generate a steady, periodic signal in response to an applied control voltage. Usually this signal is an electronic oscillation, but it can also represent a change in the frequency or phase of an output signal from another source. VCOs are used in a variety of applications, including timing and frequency control, sound synthesis, and as a basic element of an oscillator.The VCO-100TC is a one-channel Voltage Controlled Oscillator, with a frequency range of 10kHz to 100kHz. It is an analogue circuit, meaning that it produces a continuously variable output signal, rather than a digital output. The VCO-100TC can be used with different types of sensors, including micro strain gauges, piezo-electric transducers, inductive and capacitive sensors, or thermistors. The most common applications of VCO-100TC are frequency control, noise elimination, and sound synthesis. In frequency control applications, the VCO-100TC is used to adjust the frequency of an input signal based on a control voltage. This can be used to stabilize a frequency in response to changes in temperature, or to adjust the frequency of an output signal over a range of frequencies. In noise elimination applications, the VCO-100TC can be used to filter out unwanted signals, such as those caused by electrical interference or environmental conditions. The VCO can be programmed to respond to a specific frequency range, allowing it to filter out any signals that fall within that range.In sound synthesis applications, the VCO-100TC can be used to create a range of sounds, from simple tones to more complex waveforms. This is achieved by modulating the control voltage in order to change the frequency of the oscillator. Different types of waveforms can be obtained by modulating the control voltage in different ways.The VCO-100TC consists of a module, an oscillator, and an adjustable frequency control board. The module is the interface between the oscillator and the user, and allows the user to select the frequency range and to apply a control voltage. The oscillator consists of an amplifier and an inductor, and produces a constant frequency waveform in response to a control voltage applied to it. Finally, the frequency control board allows the user to adjust the frequency of the oscillator over the range of 10kHz to 100kHz.The VCO-100TC is a versatile and reliable Voltage Controlled Oscillator, suitable for a wide range of applications. Its simple design and straightforward user interface make it easy to set up and use. Its wide frequency range, adjustable frequency control, and noise elimination make it an ideal choice for frequency control and sound synthesis.

The specific data is subject to PDF, and the above content is for reference