VCO-520TCSMT2 Crystals, Oscillators, Resonators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Voltage Controlled Oscillators (VCOs) are electronic devices that generate a continuous waveform, usually sinusoidal. They have adjustable parameters such as frequency and amplitude. When a voltage is applied, their frequency or phase can be changed. VCOs are used in a wide range of applications, such as telecommunication systems, medical instruments, instrumentation, and audio systems. The VCO-520TCSMT2 is a voltage controlled oscillator designed to provide wide frequency range and precise frequency control. The VCO-520TCSMT2 has an operating frequency range of 500Hz to 10kHz, and can be tuned with a DC voltage from 0 to 10V.The VCO-520TCSMT2 is a monolithic oscillator consisting of a amplifier, a bandgap reference, and a timing resistor. The amplifier is used to drive the timing resistor. The bandgap reference is used to provide the necessary stability and temperature performance required of the VCO. The timing resistor is used to determine the frequency of the output of the VCO. The VCO-520TCSMT2 generates a sinusoidal waveform at the selected frequency by charging and discharging successive cycles of a timing capacitor. When the amplifier is on, current flows through the timing resistor, charging the timing capacitor. When the voltage on the capacitor reaches the trigger voltage of the amplifier, it turns off, and the timing capacitor starts discharging through the timing resistor. When the voltage on the capacitor reaches the reference voltage, the amplifier turns on again, charging the timing capacitor and the cycle repeats. The frequency of the VCO-520TCSMT2 is adjustable by changing the timing resistor value. As the value of the timing resistor increases, the frequency of the output of the VCO decreases. Conversely, as the value of the timing resistor decreases, the frequency of the output of the VCO increases. The frequency range of the VCO-520TCSMT2 can also be adjusted by changing the DC voltage applied to the VCO. As the DC voltage increases, the frequency range of the VCO increases.The VCO-520TCSMT2 can be used in a wide range of applications, such as oscilloscopes, medical and industrial instrumentation, and audio signal processing. It can also be used to generate tones and other periodic waveforms. The VCO-520TCSMT2 is an ideal choice for low-cost, high-precision oscillators because of its wide frequency range and precise frequency control.

The specific data is subject to PDF, and the above content is for reference