VCS50US24 Power Supplies - External/Internal (Off-Board)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AC DC converters are used to convert alternating current (AC) to direct current (DC). The VCS50US24 is one such type of AC DC converter. It is able to take an input AC voltage of up to 50 volts and convert it to an output DC voltage of up to 24 volts.

The VCS50US24 is a widely used power supply suitable for various applications including medical, industrial, LED lighting, and many others. It is typically used to power devices such as sensors, motors, and displays. It is also popular for use in power supply designs and as a testing tool.

The VCS50US24 is a switch-mode AC/DC converter with synchronous rectification technology. The input current is a precise sine-wave with a very low harmonic content. The output, is a low ripple DC voltage with virtually no noise.

The circuitry of the VCS50US24 is divided into three main parts. The primary section consists of the input AC bridge, the input filter, the rectifier circuit, and the overload protection circuit. The secondary section consists of an isolated flyback transformer, a secondary rectifier/filter, a rectifier bridge, and the overload protection circuit. The feedback section consists of an optocoupler, an error amplifier, a power switch, and the control logic.

The primary AC bridge rectifies the incoming AC current while the filter removes high frequency components. The rectifier circuit produces a DC voltage and the overload protection circuit monitors the voltage for potential overloads. The transformer isolates the input from the output and it allows the output voltage to be adjusted by changing the turns ratio.

The secondary rectifier/filter circuit converts the AC voltage from the output of the transformer to the DC voltage. The rectifier bridge rectifies the secondary AC circuit and the overload protection circuit monitors the output for potential overloads. The optocoupler connects the output to the output voltage error amplifier. The error amplifier compares the output voltage to the reference voltage and sends a feedback signal to the power switch.

The power switch turns the current flow on or off depending on the feedback signal from the error amplifier. The control logic compares the voltage feedback signal and adjusts the power switch to the power required by the output load. When the power is adjusted, the feedback signal is sent back to the error amplifier and the cycle continues.

The VCS50US24 is a reliable and efficient AC DC converter capable of withstanding harsh environmental conditions. It is capable of high efficiency due to its synchronous rectification technology and low noise output. It is suitable for a variety of applications where a regulated DC voltage is required. The VCS50US24 is an economical and reliable choice for AC to DC conversion.

The specific data is subject to PDF, and the above content is for reference