VDRH10S275BSE

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS (transient voltage suppressor) devices,Varistors, MOVs (Metal Oxide Varistors) are widely used as a protective component against overvoltages and disruptive discharge application. Especially in many industrial, consumer, automotive, aerospace and medical applications, they have become a widely adopted component. One very popular device of TVS - Varistors, MOVs category is VDRH10S275BSE.

VDRH10S275BSE is a 10mm Radial Disc shaped Non-linear Metal Oxide Varistor (MOV) with 350VAC Clamping Voltage and 10,000A peak current rating. It belongs to “SGH/SGL” series, manufactured by Panasonic Electronic Components. It is typically used for protection against Transient voltage and surge such as lightning strike. It is AEC Qualified and RoHS Compliant.

VDRH10S275BSE has multiple application fields. Some of the application found include:

• Consumer Electronics
• Industrial Electronics
• Automotive Electronics
• Protection of Telecommunications
• Aerospace Electronics
• Medical Electronics

VDRH10S275BSE protects against overvoltage and disruptive discharge through its working principle. Its disc shaped element is made up of a non-linear Metal Oxide Varistor (MOV) material. When exposed to a higher voltage, current will not continue to flow until the possible breakdown of the material. Voltage breakdown is determined by the properties of MOV material used. When voltage increases, resistance decreases proportionally and current starts to increase rapidly. This rapid increase compounds the energy dissipation, dissipating energy as heat.

VDRH10S275BSE also provides secondary backup protection against overvoltage and disruptive discharge. It combines the unique combination of MOVs and fuses. It typically utilizes an MOV block and fuse that are configured in parallel. The MOV element works in tandem with the fuse, providing additional backup protection against overvoltage and disruptive discharge. The MOV would be the first element to trigger in the event of an overvoltage or disruptive discharge. The fuse would then provide additional protection in the event the MOV fails to limit the voltage or current.

VDRH10S275BSE is a popular MOV device. It offers a good combination of high rating, low cost and smaller size. It is widely used in many different types of applications as it is AEC qualified and RoHS compliant. Its metal oxide varistor material offers excellent protection against overvoltage and disruptive discharge. Additionally, its backup protection provides addedsafety in case of failure of the MOV.

The specific data is subject to PDF, and the above content is for reference