VE09M00250K--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS (Transient Voltage Suppressors) and MOVs (Metal Oxide Varistors) are essential components in the field of electronics and electrical engineering. They both offer excellent protection from transient surges but they work in very different ways. Varistors or MOVs are voltage-dependent semiconductor devices, while TVS are typically bidirectional devices. The VE09M00250K is an MOV; it is commonly used in power supply systems and communication circuits to protect against voltage surges.

MOVs are designed to limit voltage transients by quickly conducting a high level of current when the voltage surge occurs. The MOV is essentially a MOV disk with two conductive plates placed on either side of the disk. An MOV disk works by allowing current to pass through when the voltage exceeds a certain level. As the voltage increases, the MOV disk breaks down and the metal oxide material between the two plates will conduct the current.

When the voltage drop to the normal level, the MOV disk will return to its non-conductive state. The MOV can then reset itself and protect against the same voltage surge occurring again. The VE09M00250K MOV has a rated voltage of 250VAC, and the disc itself is 10mm in diameter and 2.5mm thick. It has a thermal current of 5A and a hold current of 150A, meaning it can absorb large amounts of energy when a voltage surge occurs and not be damaged. The maximum capacitance it can handle is 500µF and it has a breakdown voltage of 3kV.

The VE09M00250K MOV is designed for use in AC applications. It is recommended for use in AC appliances such as TVs, computers, and other electronic devices. MOVs are used to protect against voltage surges caused by lightning strikes, electrical surges, and other power-related problems. By providing protection from these voltage surges, MOVs help to prevent costly damage to expensive and sensitive equipment.

The key to successful installation of the VE09M00250K is correct placement within the circuit. It should be placed as close to the power source as possible so that the MOV can be most effective. The MOV should also be connected between the ground and the phase conductor so that it is balancing the circuit properly. In addition, the MOV should also be securely fastened to ensure that it does not come loose during use.

In summary, the VE09M00250K is an MOV designed to protect against voltage spikes caused by static electricity, lightning, and other power-related problems. It works by quickly conducting a high level of current when the voltage surge occurs, and it can reset itself once the voltage has dropped back to its normal level. When installing the MOV, it should be placed as close to the power source as possible, and correctly positioned between the ground and the phase conductor. By using the VE09M00250K, users can be sure that their sensitive equipment is protected against dangerous voltage spikes.

The specific data is subject to PDF, and the above content is for reference