VIBLSD1-S24-S24-DIP

Current - Output (Max):	42mA
Control Features:	--
Size / Dimension:	0.79" L x 0.39" W x 0.28" H (20.1mm x 9.9mm x 7.2mm)
Package / Case:	14-DIP Module, 5 Leads
Mounting Type:	Through Hole
Efficiency:	68%
Operating Temperature:	-40°C ~ 85°C
Features:	SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	1kV
Power (Watts):	1W
Series:	VIBLSD1-DIP
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	24V
Voltage - Input (Max):	25.2V
Voltage - Input (Min):	22.8V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

DC-DC converters are one of the most widely used power processing converters. These converters are the reason for the efficient conversion of electrical energy to work in different types of electrical applications. Many different types of DC-DC converter designs are used in a variety of applications, including industrial, automotive, and consumer electronics. The VIBLSD1-S24-S24-DIP is one of the many DC-DC converter designs available. This article will discuss the application field and working principle of the VIBLSD1-S24-S24-DIP.

Application Field

The VIBLSD1-S24-S24-DIP DC-DC converter is designed for a range of applications, from switching DC loads to controlling LED lighting systems. The converter is capable of providing a maximum output current of 24A and a maximum power output of 48W. The VIBLSD1-S24-S24-DIP is suitable for both indoor and outdoor applications, such as industrial machines, lighting systems, power supplies, and even motor control systems.

Working Principle

The VIBLSD1-S24-S24-DIP is a non-isolated buck converter. Non-isolated buck converters work by converting a higher input voltage to a lower output voltage. The converter uses the principles of switch-mode power conversion, which is based on the transistor action of a solid-state switch. When current flows through the switch, it creates a magnetic field, which stores energy temporarily and releases it as an output when needed.The VIBLSD1-S24-S24-DIP DC-DC converter uses a Pulse Width Modulation (PWM) regulator to precisely control the output voltage of the converter. The pulse width of the PWM signal is adjusted to provide a desired output voltage. The higher the duty cycle of the PWM signal, the higher the output voltage. The PWM regulator also helps to reduce the power losses in the converter, as it is able to dynamically control the voltage and current according to the changing load conditions.The VIBLSD1-S24-S24-DIP is designed with a high-efficiency circuit. The converter has an efficiency of up to 95%. This is due to the high efficiency of the switching transistor, as well as the PWM control. The converter also features a low standby current and low standby power consumption. The low standby current helps to reduce the power losses, while the low standby power consumption helps to extend the battery life of any applications using the VIBLSD1-S24-S24-DIP.

Conclusion

The VIBLSD1-S24-S24-DIP DC-DC converter is designed for a wide range of applications, from simple switch loads to complex LED lighting systems. The non-isolated buck converter design helps to provide a high efficiency and low standby power consumption, as well as precise output voltage control. The VIBLSD1-S24-S24-DIP is suitable for both indoor and outdoor applications, and is capable of delivering a maximum output current of 24A and a maximum power output of 48W.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description