VJ1801520000G

Mounting Type:	Through Hole
Screw Thread:	M3
Torque - Screw:	0.4 Nm (3.5 Lb-In)
Screw Material - Plating:	Steel - Zinc Plated
Clamp Material - Plating:	Brass - Nickel Plated
Contact Material - Plating:	--
Housing Material:	Thermoplastic
Operating Temperature:	-40°C ~ 115°C
Color:	Green
Features:	Interlocking (Side)
Wire Termination:	Screw - Rising Cage Clamp
Series:	VJ
Wire Gauge:	12-30 AWG
Voltage:	300V
Current:	20A
Mating Orientation:	Horizontal with Board
Pitch:	0.197" (5.00mm)
Positions Per Level:	18
Number of Levels:	1
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

VJ1801520000G Application Field and Working PrincipleThe VJ1801520000G is a type of terminal block designed for electrical connections to circuit boards. It is classified as a wire-to-board (W2B) terminal block, a device with a terminal block attached to a printed circuit board to facilitate connection with other components. W2B terminal blocks allow for quick and easy interconnection of electrical wiring, providing necessary insulation and security to ensure reliable motor control and data transmission without posing a risk of short circuit.These kinds of terminal blocks can be used for different electronic components in various types of applications, such as networking control, power regulation, and voltage and current distribution. The VJ1801520000G terminal blocks are mainly used in motor control applications, where they offer consistently reliable performance under extreme conditions. They are resistant to corrosion, vibration, and high temparatures. The working principle of the VJ1801520000G terminal block is based on two main components: a box and a busbar. The terminal box has a contact pin and an insulation sleeve that fits snugly around the contact pin. The electrical connection is then made by using screws to hold the contact pin and insulation sleeve in place. The busbar has a positive and negative side which is used to join the two components in series, connecting the electrical current from one component to the other. The contact pin is where the power is transferred from the terminal block to the busbar. The terminal box has a flange that sends an electrical signal to the busbar when the pin is pushed in, allowing for smooth and reliable transmission of current. As the contact pin is pushed in, the flange gradually increases contact pressure, ensuring that there is no electrical arcing. This contact pressure helps to eliminate any potential electrical failures and ensure that the connection is secure. The insulation sleeve is designed to provide a level of protection and insulation between the contact pin and the electrical current. It is shaped to fit around the contact pin so that it prevents direct contact with power and safely insulates any electrical signals. This helps ensure that the terminal block is resistant to any potential short-circuits caused by incorrect wiring or poor contact.In terms of construction, the VJ1801520000G terminal block is composed of an ABS case and stainless steel screws. The terminal block itself is made of polyamide 6.6 with a halogen-free, non-ammonia labeling. The terminal blocks are IP20 rated, making them resistant to any kind of water, dust, or other environmental hazards. Overall, the VJ1801520000G terminal block is a reliable and secure connection solution that is suitable for a variety of motor control and voltage/current distribution applications. With its ABS case, stainless steel screws, and insulation sleeve, the terminal block provides an efficient and reliable connection between different components. The terminal block is also resistant to corrosion, vibration, and high temperatures, making it highly suitable for industrial settings where it can be exposed to harsh environmental conditions.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description