VLP4610T-6R8MR55

Q @ Freq:	--
Height - Seated (Max):	0.039" (1.00mm)
Size / Dimension:	0.181" L x 0.118" W (4.60mm x 3.00mm)
Supplier Device Package:	--
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Features:	--
Inductance Frequency - Test:	100kHz
Operating Temperature:	--
Ratings:	--
Frequency - Self Resonant:	--
Series:	VLP
DC Resistance (DCR):	550 mOhm Max
Shielding:	Shielded
Current - Saturation:	550mA
Current Rating:	690mA
Tolerance:	±20%
Inductance:	6.8µH
Material - Core:	--
Type:	Wirewound
Part Status:	Last Time Buy
Packaging:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors

The VLP4610T-6R8MR55 is a fixed inductor used for a variety of applications. Fixed inductors are two-terminal passive electrical components that provide inductance within an electrical circuit and can also be used to amplify signals. The VLP4610T-6R8MR55 specifically provides low resistance and high saturation current for low-voltage applications. As such, it is most commonly used in circuits that require small, low-voltage signals.

Applications

The VLP4610T-6R8MR55 has a wide range of applications in consumer and industrial electronics. It is most often used in personal computers and digital signal processing (DSP) systems where it is used as a filter inductor. It is also used in battery-operated equipment, such as cell phones, PDAs, and other hand-held electronics. In addition, this inductor can be used in various industrial applications, such as industrial controls, robotics, power supplies, and motion control systems. It can also be used in automotive applications, such as temperature sensors, rear view cameras, cameras, and even car audio systems.

Working Principle

The working principle of the VLP4610T-6R8MR55 is relatively simple. It is made of a material that acts as an inductor, meaning that it stores and releases energy in the form of a magnetic field. In an electrical circuit, the inductor impedes current and builds up a magnetic field when current flows through it. Then it releases the energy stored in the magnetic field when the current flow is interrupted.This type of inductor can be found in two terminal configurations, either inside a can or as a surface mount component. Either way, it works similarly. When electrical current passes through the inductor, it creates a magnetic field that acts as a filter, allowing some frequencies of the signal to pass and blocking other frequencies.

Advantages

The VLP4610T-6R8MR55 has several advantages. First, it has high saturation current for low-voltage applications, which means that it can handle higher levels of current without affecting the performance of the circuit. Second, since it is smaller and lighter, it is easier to integrate into existing circuits. Finally, its low cost makes it affordable for those on a tight budget.

Disadvantages

While the VLP4610T-6R8MR55 has several advantages, it is not without some drawbacks. First, its size can be limiting in certain applications. Second, because of its low cost, its construction may not be as reliable or of the same quality of more expensive components. Finally, high power applications are not recommended due to its limited capacity to provide high saturation current.

Conclusion

The VLP4610T-6R8MR55 is a fixed inductor used for a variety of applications. It provides low resistance and high saturation current for low-voltage applications most commonly used in personal computers and digital signal processing (DSP) systems, battery-operated equipment, industrial controls, robotics, power supplies, and motion control systems, as well as automotive applications. Its low cost and small size are major advantages, while its limited capacity and construction quality may make it less suitable for certain applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description