VLS252015ET-3R3M Inductors, Coils, Chokes

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are passive electronic components used to store energy in the form of magnetic fields. The VLS252015ET-3R3M is a fixed inductor designed for us in consumer electronics and higher frequency power applications. This paper will discuss the application field of and the working principle of the VLS252015ET-3R3M.

The VLS252015ET-3R3M is a flat wire wound inductor, which means that it is constructed by winding a flat conductor around a core of ferrite. It is formed into a square-shaped coil for ease of assembly and superb performance. This particular inductor is rated at 3.3 micro-henries and is designed to operate up to a maximum frequency of 25 MHz. It features high inductance stability and low DC resistance.

The VLS252015ET-3R3M is usually used in consumer electronics, especially in audio frequency applications such as power converters and frequency synthesizers. It is also often used in higher frequency switching mode power supply designs, where it is used to filter out high frequency switching noise generated by the output switch. The VLS252015ET-3R3M is an ideal choice for high frequency power applications due to its flat wire construction, which reduces radiated emissions and improves noise immunity.

The working principle behind the VLS252015ET-3R3M is based on Faraday’s Law of Induction. This law states that the voltage induced in a coil is proportional to the rate of change of magnetic flux associated with it. The flux is produced by the current passing through the inductor, and the induced voltage acts against the current, opposing the change in flux. This induces a voltage, which increases with frequency until the point of saturation is reached.

There are two major parameters which affect the behavior of the VLS252015ET-3R3M fixed inductor. The first is inductance, which is a measure of the amount of energy stored in the magnetic field. The second is DC Resistance, which is the resistance present in the wire prior to the application of an alternating current. These parameters are interrelated, and can be adjusted to meet the specific needs of the circuit.

In conclusion, the VLS252015ET-3R3M is an ideal choice for consumer electronics and higher frequency power applications. Its flat wire construction reduces radiated emissions and improves noise immunity, while its high inductance and low DC resistance offer excellent performance. This fixed inductor works on the principle of Faraday’s law of induction, and its adjustable parameters can be used to customize its behavior to suit the specific requirements of the circuit.

The specific data is subject to PDF, and the above content is for reference