Allicdata Part #: | VN31SPTR-E-ND |
Manufacturer Part#: |
VN31SPTR-E |
Price: | $ 2.28 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | STMicroelectronics |
Short Description: | IC SMART PWR SSR ISO POWERSO10 |
More Detail: | N/A |
DataSheet: | VN31SPTR-E Datasheet/PDF |
Quantity: | 1000 |
600 +: | $ 2.06440 |
Voltage - Supply (Vcc/Vdd): | Not Required |
Base Part Number: | VN31 |
Supplier Device Package: | 10-PowerSO |
Package / Case: | PowerSO-10 Exposed Bottom Pad |
Operating Temperature: | -40°C ~ 150°C (TJ) |
Fault Protection: | Open Load Detect, Over Temperature |
Features: | Status Flag |
Input Type: | Non-Inverting |
Rds On (Typ): | 30 mOhm (Max) |
Current - Output (Max): | 31A |
Series: | -- |
Voltage - Load: | 5.5 V ~ 26 V |
Interface: | On/Off |
Output Type: | N-Channel |
Output Configuration: | High Side |
Ratio - Input:Output: | 1:1 |
Number of Outputs: | 1 |
Switch Type: | General Purpose |
Part Status: | Active |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Power management integrated circuits, or PMICs, are a ubiquitous component of any modern embedded system, and they have a huge variety of applications. In the embedded systems world, PMICs can provide essential features such as voltage regulation, power sequencing, overvoltage protection and more. One of those PMICs, which is gaining in popularity, is the VN31SPTR-E. This device provides robust power distribution and load driving capabilities, as well as protection against overvoltage and overcurrent.
The VN31SPTR-E is specifically designed to be used as a power distribution switch, which is a component that can be used to route power from a higher voltage source to a lower voltage destination. This switch can also be used for load driving applications, where it can provide power to loads that require specific levels of voltage and current. It has an operating voltage range of 4.5V to 38V, and can handle a maximum output current of up to 5A.
The VN31SPTR-E is designed with a number of safety features to protect the circuit from overvoltage, current limiting and thermal overload. Its overvoltage protection feature allows the device to automatically shut down if an overvoltage situation is detected. It also has an adjustable soft start delay, which limits the inrush current when the device is turned on. This delay can be set from 0 to 2.5s, and prevents the large inrush of current that can be caused by traditional switch-on circuitry.
The VN31SPTR-E has an internal diagnostic and monitoring circuit to ensure that it is operating correctly. This circuit monitors the voltage levels at the input and output lines, and can detect any abnormalities that might occur. If any errors are detected, the circuit will trigger an overtemperature, overcurrent, and/or undervoltage fault flags, which can be used by the application circuitry to take corrective actions.
The VN31SPTR-E also features a patented current sensing technology, which ensures that the load is drawn correctly. This technology allows the device to measure the current load on the circuit and make the appropriate corrections to the voltage levels, in order to ensure that the load is being drawn correctly. This feature is critical in any load driving application, as it can prevent damage to the circuit due to incorrect current levels.
The VN31SPTR-E is an ideal power distribution switch and load driving solution for embedded systems. Its protection features and diagnostic capabilities make it a reliable and robust device, and its current sensing technology ensures that the power being supplied is accurate and that the load is being drawn correctly. With its wide operating voltage range and high current handling capacity, the VN31SPTR-E can be used in a variety of applications, from medical devices to robotics.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
VN31SP-E | STMicroelect... | 0.0 $ | 1000 | IC SMART PWR SSR ISO POWE... |
VN31SPTR-E | STMicroelect... | 2.28 $ | 1000 | IC SMART PWR SSR ISO POWE... |
VN31 | STMicroelect... | -- | 1000 | IC SSR HIGHSIDE PENTAWATT... |
VN31(011Y) | STMicroelect... | 0.0 $ | 1000 | IC SSR HIGHSIDE PENTAWATT... |
VN31(012Y) | STMicroelect... | 0.0 $ | 1000 | IC SMART PWR SSR ISO PENT... |
VN31-11-E | STMicroelect... | 0.0 $ | 1000 | IC SMART PWR SSR ISO PENT... |
VN31-12-E | STMicroelect... | 0.0 $ | 1000 | IC SMART PWR SSR ISO PENT... |
VN31-E | STMicroelect... | 0.0 $ | 1000 | IC SMART PWR SSR ISO PENT... |
VN31SP | STMicroelect... | -- | 1000 | IC SMART PWR SSR ISO 10-P... |
VN31SP13TR | STMicroelect... | 0.0 $ | 1000 | IC SMART PWR SSR ISO 10-P... |
EXPRESS CARD PWR SWITCH
PSC LOAD SWITCH V-DFN3030-10
IC DARL DRIVER ARRAY 4CH
IC USB POWER SWITCH 8MSOP
IC SW IPS 1CH HIGH SIDE D2PAK-5
IC SW IPS 1CH HIGH SIDE 8SOIC