VN450P13TR Integrated Circuits (ICs) |
|
Allicdata Part #: | 497-4493-2-ND |
Manufacturer Part#: |
VN450P13TR |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | STMicroelectronics |
Short Description: | RELAY SSR 3CH HI SIDE 20PWRSOIC |
More Detail: | N/A |
DataSheet: | VN450P13TR Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Voltage - Supply (Vcc/Vdd): | Not Required |
Base Part Number: | VN450 |
Supplier Device Package: | PowerSO-20 |
Package / Case: | 20-SOIC (0.433", 11.00mm Width) Exposed Pad |
Operating Temperature: | -40°C ~ 150°C (TJ) |
Fault Protection: | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
Features: | Status Flag |
Input Type: | Non-Inverting |
Rds On (Typ): | 40 mOhm (Max), 300 mOhm (Max) |
Current - Output (Max): | 10A, 2A |
Series: | -- |
Voltage - Load: | 5.5 V ~ 36 V |
Interface: | On/Off |
Output Type: | -- |
Output Configuration: | High Side |
Ratio - Input:Output: | 1:1 |
Number of Outputs: | 3 |
Switch Type: | Relay, Solenoid Driver |
Part Status: | Obsolete |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
VN450P13TR is a Power Distribution Switches, Load Drivers device, which is typically used in automotive, consumer and industrial markets. The device features high current, low noise and low on-state resistance. This product combines an array of power switches and an array of load drivers to enable the routing of power between two points.
The device is designed for automotive, consumer and industrial applications. It enables the routing of power between two points with high current, low noise, and low on-state resistance. The product also supports various power supply and load types, including buck, boost, linear, and mixed-mode operation. This is achieved by the inclusion of an integrated programmable DC-DC power supply controller and an array of load drivers.
The device features an integrated programmable DC-DC power supply controller and an array of load drivers, allowing it to switch between buck, boost, linear and mixed-mode operation. The controller is programmable, allowing it to be adjusted for maximum efficiency in a given application. The device also offers a wide range of operating voltages, ranging from 3.3V to 48V. It also offers two programmable current limits and two programmable voltage limits, which can be adjusted to suit the requirements of a given application. The device also supports various power supply and load types, including buck, boost, linear, and mixed-mode operation.
The working principle of the VN450P13TR device is as follows. When the device is powered up, the integrated programmable DC-DC power supply controller will begin to operate. The controller is programmed to adjust the voltage and current limits of the device to achieve maximum efficiency. It will then begin to regulate the power supply output so that the device can switch between buck, boost, linear and mixed-mode operation. The load drivers will also begin to operate, allowing the device to switch between different power supply and load types.
In order to achieve the highest efficiency in a given application, the user must program the voltage and current limits of the device and optimize the power supply output. The user must also ensure that the load drivers operate properly, to ensure that the power is routed between the two points in an efficient manner. Finally, the user must ensure that the device is properly insulated and that there are no shorts or impedance mismatch between the different power sources.
In summary, the VN450P13TR is a Power Distribution Switches, Load Drivers device specifically designed for automotive, consumer and industrial applications. The device is equipped with an integrated programmable DC-DC power supply controller and an array of load drivers, allowing it to switch between buck, boost, linear and mixed-mode operation. It also offers two programmable current limits and two programmable voltage limits, which can be adjusted to suit the requirements of a given application. The device also features high current and low noise operation, and is insulated to prevent short circuits and impedance mismatch.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
VN450P-E | STMicroelect... | 0.0 $ | 1000 | IC DVR TRPL DOOR CTRL PWR... |
VN450P | STMicroelect... | 0.0 $ | 1000 | IC DVR TRPL DOOR CTRL PWR... |
VN450PTR-E | STMicroelect... | 0.0 $ | 1000 | IC DVR TRPL DOOR CTRL PWR... |
VN450P13TR | STMicroelect... | 0.0 $ | 1000 | RELAY SSR 3CH HI SIDE 20P... |
EXPRESS CARD PWR SWITCH
PSC LOAD SWITCH V-DFN3030-10
IC DARL DRIVER ARRAY 4CH
IC USB POWER SWITCH 8MSOP
IC SW IPS 1CH HIGH SIDE D2PAK-5
IC SW IPS 1CH HIGH SIDE 8SOIC