VN5E010AHTR-E Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The VN5E010AHTR-E is a power distribution switch, load driver and global circuit protection device. It is a programmable and configurable low voltage switch that can be used in a variety of applications.

The VN5E010AHTR-E has a CMOS pFET on-board and can support up to 120mA output current. The on-board current limit with auto-restart feature provides short-circuit protection and makes this device suitable for wide range of applications in the automotive, industrial, consumer and portable markets.

The VN5E010AHTR-E also features a wide 0.8V to 2.5V operating supply range, a low on-resistance with a 600mV dropout maximum and a dual output DMOS switch configuration. This enables the device to operate in a variety of power management applications such as general purpose power or load switch, LED driver, backlight control and general purpose cell-phone or power management.

Applications of the VN5E010AHTR-E range from battery charging to distributed power management, LED and power control, LDO and DC-DC converter control and more. The device can also be used in analog and digital signal processing applications, communication systems, systems and controllers. It is ideal for portable, automotive, industrial and consumer applications.

The VN5E010AHTR-E provides two configurable DMOS switches with over-current protection. The switches utilize a voltage control input and a floating output. The operation of the switch can be controlled by an external signal for a variety of control functions, or the control logic can be configured internally for use in power management when integrated in a system.

When the VN5E010AHTR-E is used as a general purpose power switch, the current limit is set to the minimum current limit for the application. When used as a load switch, the current limit is set to the load current to be driven. The device utilizes its output discharge feature which allows the output to be discharged to ground when the device is disabled, providing a more energy efficient control.

The VN5E010AHTR-E can also be used as a circuit protection device. When used as a circuit protection device, the device utilizes its open drain output to provide circuit protection by isolating the output from the application circuit. This feature prevents excessive inrush current, under voltage or over voltage conditions, and ensures the circuit is protected in the event of a fault.

The VN5E010AHTR-E is a high performance, low voltage power switch and circuit protection device that is ideal for a wide range of applications. It can be used to control power supplies, LED drivers, backlighting, general purpose cell-phone, distributed power management and many other applications. Its wide operating voltage ranges and low on-resistance with a maximum 600mV dropout make it suitable for these applications. It provides an integrated circuit protection feature that can be used to provide isolation in the event of a fault. Furthermore, the two configurable DMOS switches and current limit with auto-restart feature provide added protection and make this device an ideal choice for wide range of applications.

The specific data is subject to PDF, and the above content is for reference