Allicdata Part #: | VND920P-E-ND |
Manufacturer Part#: |
VND920P-E |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | STMicroelectronics |
Short Description: | IC DVR HIGH SIDE 2CH 28SOIC |
More Detail: | N/A |
DataSheet: | VND920P-E Datasheet/PDF |
Quantity: | 1000 |
Voltage - Supply (Vcc/Vdd): | Not Required |
Base Part Number: | VND920 |
Supplier Device Package: | 28-SO |
Package / Case: | 28-SOIC (0.295", 7.50mm Width) |
Operating Temperature: | -40°C ~ 150°C (TJ) |
Fault Protection: | Current Limiting (Fixed), Over Temperature, Over Voltage |
Features: | Auto Restart |
Input Type: | Non-Inverting |
Rds On (Typ): | 16 mOhm (Max) |
Current - Output (Max): | 30A |
Series: | VIPower™ |
Voltage - Load: | 5.5 V ~ 36 V |
Interface: | On/Off |
Output Type: | N-Channel |
Output Configuration: | High Side |
Ratio - Input:Output: | 1:1 |
Number of Outputs: | 2 |
Switch Type: | General Purpose |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The VND920P-E is a power distribution switch or load driver integrated circuit (IC). It is part of a family of Power Management Integrated Circuits (PMICs) from Vishay Intertechnology that are used in a variety of different electronic applications.
The VND920P-E circuit is designed to control the current and voltage supply of a device while delivering optimal power efficiency. The switch enables a device to remain in a low power state until it is required to perform a specific task. This helps to conserve energy and improve the battery life of mobile devices such as smartphones and tablets.
The VND920P-E circuit consists of a Switch, Load Sense, and a Logic Block. The Switch acts to enable or disable the device under control. The Load Sense monitors the current draw of the device and sends a signal to the Logic Block when it reaches a predetermined amount. The Logic Block actively drives the output of the switch to the desired level.
The circuit is designed to automatically power up a device when it detects voltage from an external source, such as an AC adapter. The logic block will then adjust the output of the switch to match the specified output power requirements of the device. This helps ensure that the device has a reliable supply of voltage and current without sacrificing power efficiency.
The VND920P-E can also be used to control the power output of a device. The Load Sense can be used to measure the current draw and can be programmed to limit the amount of current flowing through the device. This helps to protect the device from overload and improve its energy efficiency. It can also help to reduce the device’s total power consumption and help extend the battery life.
The VND920P-E is a versatile solution for controlling power in a variety of electronic devices. It can be used to help optimize power efficiency, protect the device from overload, and extend battery life. It is an essential element of any PMIC package and should be taken into consideration when selecting a power management solution.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
VND920-E | STMicroelect... | 0.0 $ | 1000 | IC DRIVER HIGH SIDE 2CH 2... |
VND920TR-E | STMicroelect... | 0.0 $ | 1000 | IC DRIVER HIGH SIDE 2CH 2... |
VND920PTR-E | STMicroelect... | 2.26 $ | 1000 | IC DRIVER HIGH SIDE 2CH 2... |
VND920P-E | STMicroelect... | -- | 1000 | IC DVR HIGH SIDE 2CH 28SO... |
VND920 | STMicroelect... | -- | 1000 | IC DRIVER DUAL 36V 35A 28... |
VND92013TR | STMicroelect... | -- | 1000 | RELAY SSR 2CH HI-SIDE 28-... |
EXPRESS CARD PWR SWITCH
PSC LOAD SWITCH V-DFN3030-10
IC DARL DRIVER ARRAY 4CH
IC USB POWER SWITCH 8MSOP
IC SW IPS 1CH HIGH SIDE D2PAK-5
IC SW IPS 1CH HIGH SIDE 8SOIC