Allicdata Part #: | 497-16448-ND |
Manufacturer Part#: |
VNI4140K-32 |
Price: | $ 3.35 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | STMicroelectronics |
Short Description: | IC HIGH SIDE 4CH SSR POWERSSO24 |
More Detail: | N/A |
DataSheet: | VNI4140K-32 Datasheet/PDF |
Quantity: | 356 |
1 +: | $ 3.04920 |
10 +: | $ 2.73609 |
100 +: | $ 2.24192 |
500 +: | $ 1.90849 |
1000 +: | $ 1.60956 |
Voltage - Supply (Vcc/Vdd): | Not Required |
Base Part Number: | VNI4140 |
Supplier Device Package: | PowerSSO-24 |
Package / Case: | 24-BSOP (0.295", 7.50mm Width) Exposed Pad |
Operating Temperature: | -40°C ~ 125°C (TJ) |
Fault Protection: | Current Limiting (Fixed), Over Temperature |
Features: | Status Flag |
Input Type: | Non-Inverting |
Rds On (Typ): | 80 mOhm (Max) |
Current - Output (Max): | 1A |
Series: | VIPower™ |
Voltage - Load: | 10.5 V ~ 36 V |
Interface: | On/Off |
Output Type: | N-Channel |
Output Configuration: | High Side |
Ratio - Input:Output: | 1:1 |
Number of Outputs: | 4 |
Switch Type: | General Purpose |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
VNI4140K-32, a power distribution switch, is a device designed to provide a reliable and steady stream of electrical power to various types of circuits and systems. This device is designed to provide efficient power distribution in a wide range of applications and is suitable for use in a variety of systems such as computer systems, industrial equipment, medical equipment, and other sophisticated systems. Additionally, this device is designed to be used in various configurations and is available in various current and voltage ranges.
The VNI4140K-32 is a three-phase diode with a maximum on-state drain current of 4A. It is an ideal power distribution switch for applications where a low on-state resistance and low leakage current is necessary. The device is specifically designed for applications where noise immunity and high EMI reduction is required. The device has a typical reverse voltage of 6V and a maximum reverse voltage of 15V. The device has a threshold voltage of 2.5V and a drain to source on-state resistance of 30 ohms. The device provides superior protection against surge currents due to its low leakage current.
The VNI4140K-32 is a low side power switch and it is used for the purpose of efficiently controlling power distribution. The device is designed to provide fast, reliable, and efficient switching between different load. The device is also suitable for controlling and distributing power to multiple loads. The device is designed to be used in systems where high efficiency and low power dissipation is required, such as in portable and hand-held systems. The device utilizes a simple two-transistor voltage regulator circuit in which the switching element is a power MOSFET, which is triggered by an integrated circuit.
The VNI4140K-32 load driver is designed to provide quick and reliable switching between different load states. The load driver is has a built-in current sense circuit that detects the current coming from the load and adjusts its output based on the detected current. This feature allows for efficient and accurate control of the output voltage and current. In addition, this load driver is equipped with a low inner resistance output, which allows for maximum efficiency when supplying power.
The VNI4140K-32 is a power distribution switch that provides superior protection against surge currents due to its low leakage current. The device is designed to provide fast, reliable, and efficient power control and distribution for a variety of applications. The device utilizes a simple two-transistor voltage regulator circuit and a power MOSFET as the switching element, which are triggered by an integrated circuit. Additionally, the device is equipped with a load driver with a current sense circuit and a low inner resistance output, which allows for maximum efficiency when supplying power. This power distribution switch is suitable for use in various configurations and is available in various current and voltage ranges.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
VNI4140K-32 | STMicroelect... | 3.35 $ | 356 | IC HIGH SIDE 4CH SSR POWE... |
VNI4 | Carlo Gavazz... | 213.44 $ | 1000 | LEVEL SENSOR 4X1M S S INS... |
VNI4140K | STMicroelect... | -- | 1000 | IC SMART PWR SSR QUAD POW... |
VNI4140KTR | STMicroelect... | -- | 1000 | IC SMART PWR QUAD HISD PW... |
VNI4140KTR-32 | STMicroelect... | 1.77 $ | 0 | IC HIGH SIDE 4CH SSR POWE... |
EXPRESS CARD PWR SWITCH
PSC LOAD SWITCH V-DFN3030-10
IC DARL DRIVER ARRAY 4CH
IC USB POWER SWITCH 8MSOP
IC SW IPS 1CH HIGH SIDE D2PAK-5
IC SW IPS 1CH HIGH SIDE 8SOIC