Allicdata Part #: | 497-2667-5-ND |
Manufacturer Part#: |
VNP28N04 |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | STMicroelectronics |
Short Description: | MOSFET N-CH 42V 28A TO-220 |
More Detail: | N/A |
DataSheet: | VNP28N04 Datasheet/PDF |
Quantity: | 1000 |
Voltage - Supply (Vcc/Vdd): | Not Required |
Base Part Number: | VN*28N |
Supplier Device Package: | TO-220AB |
Package / Case: | TO-220-3 |
Operating Temperature: | -- |
Fault Protection: | Current Limiting (Fixed), Over Temperature, Over Voltage |
Features: | Status Flag |
Input Type: | Non-Inverting |
Rds On (Typ): | 35 mOhm (Max) |
Current - Output (Max): | 20A |
Series: | OMNIFET™, VIPower™ |
Voltage - Load: | 35V (Max) |
Interface: | On/Off |
Output Type: | N-Channel |
Output Configuration: | Low Side |
Ratio - Input:Output: | 1:1 |
Number of Outputs: | 1 |
Switch Type: | General Purpose |
Part Status: | Obsolete |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The VNP28N04 is a power distribution switch, load driver, and general-purpose device that has excellent power efficiency and a wide range of operating frequencies. It offers a variety of features for system designers, including high-efficiency thermal performance, adjustable switching frequency and low quiescent current. With this device, it is possible to control several power outputs from a single control signal.
The device integrates two power switches with one load output to provide load control, protection, and system integration. The two power switches are connected in parallel and are capable of switching both positive and negative voltage signals, allowing for flexible control of power distribution.
The VNP28N04 uses a current limitation circuit that prevents power switching circuits from shorting out when the load output is floating. This current limitation circuit makes the device suitable for vehicle applications, eliminating the danger of short circuits in the power switching circuit.
In addition, the device is equipped with an adjustable frequency control, allowing system designers to reduce the switching frequency and minimize RF interference. This feature helps reduce the effects of induced vibration and noise on the system, and also works to reduce power dissipation.
The VNP28N04 is also integrated with self-protection circuits that detect and prevent over-voltage, over-current, and over-temperature conditions from occurring. These circuits help maintain system reliability, prevent component damage, and improve system efficiency and performance.
The device can also be used to drive a wide range of loads, from relays and motors to LED drivers and micro-servo motors. The device is capable of driving either a single load or up to eight loads, depending on the application.
The VNP28N04 is an ideal choice for a wide range of applications, from automotive and consumer electronics to industrial, commercial, and medical applications. With its wide range of features and superior power efficiency, the VNP28N04 is an excellent solution for power distribution and load control.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
VNP20N07-E | STMicroelect... | 1.11 $ | 1000 | MOSFET OMNIFET 70V 20A TO... |
VNP28N04 | STMicroelect... | -- | 1000 | MOSFET N-CH 42V 28A TO-22... |
VNP20N07FI | STMicroelect... | 0.0 $ | 1000 | MOSFET POWER 70V 20A ISOW... |
VNP28N04FI | STMicroelect... | 0.0 $ | 1000 | MOSFET POWER 42V 28A ISOW... |
VNP20N07 | STMicroelect... | 0.0 $ | 1000 | MOSFET N-CH 70V 20A TO-22... |
EXPRESS CARD PWR SWITCH
PSC LOAD SWITCH V-DFN3030-10
IC DARL DRIVER ARRAY 4CH
IC USB POWER SWITCH 8MSOP
IC SW IPS 1CH HIGH SIDE D2PAK-5
IC SW IPS 1CH HIGH SIDE 8SOIC