Allicdata Part #: | VNP49N04-E-ND |
Manufacturer Part#: |
VNP49N04-E |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | STMicroelectronics |
Short Description: | MOSFET POWER 42V 49A TO-220-3 |
More Detail: | N/A |
DataSheet: | VNP49N04-E Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Voltage - Supply (Vcc/Vdd): | Not Required |
Base Part Number: | VN*49N |
Supplier Device Package: | TO-220AB |
Package / Case: | TO-220-3 |
Operating Temperature: | -- |
Fault Protection: | Current Limiting (Fixed), Over Temperature, Over Voltage |
Features: | Status Flag |
Input Type: | Non-Inverting |
Rds On (Typ): | 20 mOhm (Max) |
Current - Output (Max): | 30A |
Series: | OMNIFET™, VIPower™ |
Voltage - Load: | 35V (Max) |
Interface: | On/Off |
Output Type: | N-Channel |
Output Configuration: | Low Side |
Ratio - Input:Output: | 1:1 |
Number of Outputs: | 1 |
Switch Type: | General Purpose |
Part Status: | Obsolete |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
VNP49N04-E is a 4-channel MOSFET driver, with high-speed, low RDS(ON) power MOSFET switching. This driver is a Non-Inverting surface-mount device with a logic low threshold and a positive speed up circuit for increased switching speed. It is designed for applications requiring high speed and high accuracy switching such as high frequency switching and power distribution.
The VNP49N04-E is especially suited for automotive and industrial applications, where a high-speed, low RDS(ON) power MOSFET switch is required. The driver devices is packaged in a small 8-pin package, making it ideally suited for space constrained applications. The device also offers a high-speed, low RDS(ON) switching delay of 35ns, which is ideal for applications requiring high frequency switching.
The VNP49N04-E is well suited for power distribution and load switching applications, such as motor control and regulator circuits. It features a low propagation delay time of 14 ns and is capable of switching loads up to 32A with its integrated overcurrent protection circuit. The VNP49N04-E is also suitable for use in low power applications, such as DC-DC converters and lighting controllers.
The working principle of the VNP49N04-E is based on the MOSFET-based switching process, where current is transmitted through the channels of the device. The device is equipped with an integrated over-current protection (OCP) circuit which safeguards the device from excessive current flow. The OCP circuit is capable of sensing and recording over-current conditions and will shut off the switch if the current exceeds a predetermined threshold.
The VNP49N04-E is designed for applications requiring high-speed, low RDSON switching. The device has low on-resistance and propagation delay times, making it ideal for power distribution applications. The device also features an integrated OCP circuit, which protects against excessive current flow. Thus, VNP49N04-E is an ideal choice for applications such as low power and high frequency switching, motor control and DC-DC conversion.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
VNP49N04 | STMicroelect... | 0.0 $ | 1000 | MOSFET N-CH 42V 49A TO-22... |
VNP49N04FI | STMicroelect... | 0.0 $ | 1000 | MOSFET N-CH 42V 49A ISOWA... |
VNP49N04-E | STMicroelect... | 0.0 $ | 1000 | MOSFET POWER 42V 49A TO-2... |
VNP49N04FI-E | STMicroelect... | 0.0 $ | 1000 | MOSFET POWER 42V 49A TO-2... |
EXPRESS CARD PWR SWITCH
PSC LOAD SWITCH V-DFN3030-10
IC DARL DRIVER ARRAY 4CH
IC USB POWER SWITCH 8MSOP
IC SW IPS 1CH HIGH SIDE D2PAK-5
IC SW IPS 1CH HIGH SIDE 8SOIC