Allicdata Part #: | VNV49N0413TR-ND |
Manufacturer Part#: |
VNV49N0413TR |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | STMicroelectronics |
Short Description: | MOSFET OMNIFET 42V 49A POWERSO10 |
More Detail: | N/A |
DataSheet: | VNV49N0413TR Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Voltage - Supply (Vcc/Vdd): | Not Required |
Base Part Number: | VN*49N |
Supplier Device Package: | 10-PowerSO |
Package / Case: | PowerSO-10 Exposed Bottom Pad |
Operating Temperature: | -40°C ~ 150°C (TJ) |
Fault Protection: | Current Limiting (Fixed), Over Temperature, Over Voltage |
Features: | -- |
Input Type: | Non-Inverting |
Rds On (Typ): | 40 mOhm (Max) |
Current - Output (Max): | 28A |
Series: | OMNIFET™, VIPower™ |
Voltage - Load: | 33V (Max) |
Interface: | On/Off |
Output Type: | N-Channel |
Output Configuration: | Low Side |
Ratio - Input:Output: | 1:1 |
Number of Outputs: | 1 |
Switch Type: | General Purpose |
Part Status: | Obsolete |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
VNV49N0413TR is a surge protection device (SPD) which belongs to the power management integrated circuit (PMIC) family. It is an integrated chip designed for the protection of power distribution switches, load drivers and other on-board power bus systems against power surges. The working principle of VNV49N0413TR is based on the principle of self-closing capacitors. When a surge is detected, the capacitors close, dissipating the surge current and protecting the load from transient voltages or currents that can damage their components.
VNV49N0413TR works by using an active diode rectifier. It provides voltage protection for the power system by connecting the power input to the rectifier. When a high voltage is detected, the rectifier circuit prevents the high voltage from entering the system and discharges it, thus providing protection to the circuit. The diode rectifier also provides protection against reverse current, thereby protecting the power system from damage.
VNV49N0413TR is a low voltage drop device that provides protection for high current pulse applications. As the name suggests, it provides surge protection for on-board power bus systems and loads. It is designed for use with a single supply voltage, which is typically 3.3V or 5V, and is capable of delivering up to 10 Amps of drive current in low voltage drop switch modes. Furthermore, it has an improved immunity to transient noise and sharp edges, allowing it to perform in high noise environments.
VNV49N0413TR is ideal for use in a wide range of applications, such as automotive, industrial, home appliances, and audio systems. It is designed for use in switch mode power supplies, which require a high level of surge protection. It is also suitable for use in Microcontroller-based systems, as it can protect against power statistics and over-voltage events. It also includes fault diagnosis and information feedback systems, allowing to quickly and effectively identify faults in the power system.
VNV49N0413TR is a cost-effective solution for surge protection. It provides a reliable and efficient protection against transient voltages and currents, protecting power distribution switches and load drivers. This device is designed to meet the industry standards for surge protection, and is designed for use in many different types of applications. It is an ideal solution for providing protection to your power system.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
VNV49N04 | STMicroelect... | 0.0 $ | 1000 | MOSFET POWER 42V 49A PWRS... |
VNV49N0413TR | STMicroelect... | 0.0 $ | 1000 | MOSFET OMNIFET 42V 49A PO... |
EXPRESS CARD PWR SWITCH
PSC LOAD SWITCH V-DFN3030-10
IC DARL DRIVER ARRAY 4CH
IC USB POWER SWITCH 8MSOP
IC SW IPS 1CH HIGH SIDE D2PAK-5
IC SW IPS 1CH HIGH SIDE 8SOIC