VO610A-3X016

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electrical components used to prevent signal interference or electrical noise from affecting connected devices. The VO610A-3X016 is an optoisolator that provides galvanic isolation of up to 1000VAC between two circuits. This device features an IR filtered GaAlAs LED light source and low reverse current when the LED is turned off. It offers short-circuit protection, with current protection up to a maximum of 120mA.

The primary application of VO610A-3X016 is as a voltage- or current-sensitive switch with its integrated transistor output, or as a light activated switch, allowing for powerful applications through its photovoltaic output. This optoisolator can also be used to replace mechanical relays in applications where voltage or current isolation is needed.

The VO610A-3X016 optoisolator has a photovoltaic output, which uses the circuit’s LED light source to create a voltage signal that can be used to control the flow of a current. This photovoltaic output has two separate states: a saturated state and a non-saturated state, depending on the amount of light present. The saturated state is created when the LED light source is illuminated and produces sufficient voltage to saturate the transistor output. The non-saturated state is triggered when the LED light source is dimmed, which reduces the voltage and results in the transistor output opening.

The Photovoltaic output also features a built-in open-collector output, which allows for pulse width modifications to be made to the voltage signal that corresponds to the amount of light. The open collector output improves the switching speed of the device, allowing for faster and more accurate switching.

The VO610A-3X016 has a transistor output, which requires an input signal in the form of a voltage pulse, typically from a logic gate circuit. When voltage is applied to the LED light source, the transistor output is triggered and the current travels through the circuit. The transistor output can also be adjusted or disabled by controlling the LED light source with a logic gate circuit since the LED is turned on and off depending on the logic level.

The VO610A-3X016 is designed to last in harsh environments, with an operating temperature range from –40°C to +105°C and a storage temperature range of -40°C to +125°C. Its housing is weatherproof and shockproof, and it also has UV radiation protection.

The advantages of the VO610A-3X016 optoisolator include its long life, high voltage isolation, and low failure rate. Its photovoltaic output is ideal for applications in which high-speed switching is required, and its transistor output can be used to provide voltage or current isolation. In addition, its high temperature insulation is suitable for operation in extreme environments.

The specific data is subject to PDF, and the above content is for reference