VO615A-4X007T Isolators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electronic components that divide an electrical circuit into two sections, allowing each section to be completely independent and insulated from each other. They are commonly used in applications that require isolation of higher voltage power supplies from a lower voltage microcontroller/sensor circuitry, and to isolate sensitive circuitry from switching noise.The VO615A-4X007T is a 4-pin opto-isolator that is rated for 3,500 VRMS and 30mA surge current. It uses a multi-junction photovoltaic output to provide isolation of up to 350Vdc. It features a photovoltaic output transistor and an LED input, as well as a non-flammable epoxy package.The VO615A-4X007T is a widely used opto-isolator, typically found in commercial products that require electrical isolation between inputs and outputs. It can be used to provide power/signal isolation in applications such as motor controllers, power supplies, instrumentation, alarms, and data communication systems.The working principle of the VO615A-4X007T is based on a multi-junction photovoltaic output and an LED input. The LED input is powered by a voltage between 0 and 30V, and is coupled to the photovoltaic output via a mirrored aluminum reflector. When the LED is illuminated, the photovoltaic output voltage is generated. This voltage is proportional to the LED input voltage and provides a low current voltage output.The main advantage of the VO615A-4X007T is its ability to provide electrical isolation up to 350Vdc between its inputs and outputs. This is due to the photovoltaic output and LED input configuration, which helps to reduce ground loops and leakage currents. Additionally, the isolated output voltage is also proportional to the LED input voltage, and therefore provides a consistent voltage level regardless of input current variations.Due to its high isolation rating, the VO615A-4X007T is a popular choice for applications that require a cost-effective but reliable opto-isolator. While its rated power is low, it is capable of handling heavy surges and transients without damage, and its low profile epoxy package provides protection against vibration and shock.Overall, the VO615A-4X007T is a highly reliable and cost-effective opto-isolator, and is a great choice for applications that require electrical isolation up to 350Vdc. Its multi-junction photovoltaic output and LED input make it an ideal solution for high current and voltage applications, and its non-flammable epoxy package provides protection against environmental conditions.

The specific data is subject to PDF, and the above content is for reference