VOM618A-7T

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Number of Channels:	1
Voltage - Isolation:	3750Vrms
Current Transfer Ratio (Min):	80% @ 1mA
Current Transfer Ratio (Max):	160% @ 1mA
Turn On / Turn Off Time (Typ):	7µs, 6µs
Rise / Fall Time (Typ):	5µs, 4µs
Input Type:	DC
Output Type:	Transistor
Voltage - Output (Max):	80V
Current - Output / Channel:	50mA
Voltage - Forward (Vf) (Typ):	1.1V
Current - DC Forward (If) (Max):	60mA
Vce Saturation (Max):	400mV
Operating Temperature:	-55°C ~ 110°C
Mounting Type:	Surface Mount
Package / Case:	4-SMD, Gull Wing
Supplier Device Package:	4-SOP (2.54mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Transistor, Photovoltaic Output

Optoisolators are electronic components used to transfer signals through optical isolation. This type of isolation is used to isolate different parts of a circuit from one another, and to prevent the failure of one section of a circuit from causing a complete system failure. The VOM618A-7T is an optoisolator that uses a photovoltaic output to transfer signals.The VOM618A-7T is a six pin single opto-isolator designed for use in industrial applications. It has a phototransistor output that is triggered when light from an external source is directed into its built-in photodiode. The phototransistor\'s collector current is typically around 1mA when triggered.The VOM618A-7T can be used for a range of applications, such as controlling a fan or switching on a pump. It can also be used to control low-voltage circuits, or to buffer signal inputs from a microcontroller. The optoisolator is designed with noise immunization in mind, so it can be used to validly transfer signals from mains circuits.The VOM618A-7T is designed for use in an industrial environment, where it must withstand temperatures of up to 105 degrees Celsius. It has a typical working current of 1 mA and a maximum working voltage of 30 volts. This combination makes it ideal for controlling low-power devices.The VOM618A-7T works by using an internal photodiode to detect light, which is then used to trigger a phototransistor output. This output is then sent as a signal which is used to control an external device. The output of the phototransistor can be switched on or off according to the amount of light the diode detects.The VOM618A-7T also has an array of interface pins to make connection easier. The pins include an output voltage pin, an output current pin, a ground pin, and a power supply pin. All of these pins are connected to the internal circuit, so there is no need for additional external wiring.The VOM618A-7T is designed for use in a variety of industrial applications. It can be used to control a fan, switch on a pump, control low-voltage circuits, or buffer signal inputs from a microcontroller. Its noise immunization makes it ideal for validly transferring signals, and its temperature range of up to 105 degrees Celsius makes it suitable for use in industrial environments. Furthermore, its array of interface pins makes connecting it to an external device easier and faster. The VOM618A-7T is an effective optoisolator that is suitable for a range of industrial applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description