VR68000001304JAC00

Series:	VR68
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	1.3 MOhms
Tolerance:	±5%
Power (Watts):	1W
Composition:	Metal Film
Features:	High Voltage, Pulse Withstanding
Temperature Coefficient:	±200ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.268" Dia x 0.709" L (6.80mm x 18.00mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Through Hole Resistors

Through hole resistors are one of the most widely used electrical components in the electronics industry. They are an essential part of any electronic circuits, and many types of resistors are available for use in different applications.Through hole resistors are generally constructed with a metal or glass-filled ceramic body and a pair of metal leads that extend through the body to make contact with the metallic box. The resistance of a through hole resistor is determined by its size, the material used in its construction, and the number of turns of wire, if any, that traverse the body.

VR68000001304JAC00 Application Field and Working Principle

VR68000001304JAC00 is a through hole resistor and is mainly used for the switching purposes. It is available in a variety of tolerances and resistance values. The main characteristics of this resistor are its maximum dc voltage rating, dc current rating, and temperature coefficient. The resistor can handle up to 6.8 volts of dc voltage and up to 1.3 Amps of dc current. The temperature coefficient of this component is 0.04%. When it comes to the resistor’s working principles, the resistor works by using the heat generated by the current passing through the resistor to change its resistance. When the current is applied, the resistor increases in value, causing more heat to be generated. This increase in heat causes the resistance to increase again, and the current is reduced in order to maintain the resistance resistant. The cycle then repeats, and the resistor is able to dissipate the heat from the current. The components also have a finite amount of power it can safely handle. If the current is too high, it will cause the resistor to exceed its power dissipation limits, which can lead to either permanent damage or just simple overheating. It is important to be aware of this, and take precautions to avoid exceeding the maximum power levels of the resistor.

Conclusion

Through hole resistors are one of the most common electrical components used in the electronics industry, and VR68000001304JAC00 is no exception. It is a through hole component that is mainly used for switching purposes. Its resistance values are determined by its size, material and number of turns of wire in its construction. In terms of working principles, the resistor works by using the heat generated by the current passing through the resistor to change its resistance. Moreover, it is important to keep in mind that the resistor can only safely handle a finite amount of power, and if this is exceeded, it could cause permanent damage and overheating.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description