VS-100BGQ030HF4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Rectifiers - Single

The VS-100BGQ030HF4 is a single rectifier diode that can be used in a variety of applications. This device is composed of an Si-Ge/Si-Si heterojunction formed as an epitaxial planar structure. It has an average forward current rating of 100A, a reverse current rating of 150mA and a forward voltage rating of 4V.

The primary use of this diode is as a rectifier, that is the conversion of AC current to DC current. Rectifiers are found in power supplies, motor drives and other such applications where DC power is required. Rectification is primarily done using controlled devices such as thyristors or power transistors, but these devices require relatively complex commutation. Most small electronic systems require only simpler, less costly, non-controlled rectifiers.

The operating principles of diodes are based on the fact that they allow current in only one direction and become very non-conductive when an reverse bias voltage is applied. This effect can be seen in the forward I-V characteristics of the diode which are typically exponential with high current gains when forward biased. When connected to a circuit with an AC voltage source, current will flow through the diode in only one direction, thus rectifying the AC into DC.

The VS-100BGQ030HF4 offers a number of advantages over other rectifier diodes, such as greater breakdown voltage, higher forward current rating and a low forward voltage drop. It also provides excellent temperature stability and a low reverse current leakage. The device is also rated at a maximum junction temperature of 175° C and is able to operate at a reverse voltage up to 150V.

The VS-100BGQ030HF4 is an ideal choice for applications such as power supplies, motor drives, AC/DC converters and power management systems. The device helps to provide efficient rectification, as well as greater temperature stability and low forward voltage drops for higher efficiency. It is also a cost effective solution for systems that require non-controlled rectification.

The specific data is subject to PDF, and the above content is for reference