VS-10CWH02FNTR-M3 Discrete Semiconductor Products

Series:	FRED Pt®
Packaging:	Tape & Reel (TR)
Part Status:	Active
Diode Configuration:	1 Pair Common Cathode
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	200V
Current - Average Rectified (Io) (per Diode):	10A
Voltage - Forward (Vf) (Max) @ If:	1.15V @ 10A
Speed:	Fast Recovery = 200mA (Io)
Reverse Recovery Time (trr):	21ns
Current - Reverse Leakage @ Vr:	4µA @ 200V
Operating Temperature - Junction:	-55°C ~ 175°C
Mounting Type:	Surface Mount
Package / Case:	TO-252-3, DPak (2 Leads + Tab), SC-63
Supplier Device Package:	D-PAK (TO-252AA)
Base Part Number:	10CWH02

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The VS-10CWH02FNTR-M3 is a rectifier array designed for a variety of applications. It features five individually isolated outputs each rated at 1.0A and a reverse current leakage less than 70μA. As a result of its low power demands, it also works under a variety of operating temperatures, making it ideal for a variety of applications.

Applications

The VS-10CWH02FNTR-M3 is designed for use in a wide range of applications, including automotive, consumer electronics, industrial, communication, and medical. It is particularly well-suited for applications where power demands are low and operating temperatures are high, such as laptops that are portable or exposed to direct sunlight. The device can also be used in a variety of other applications, such as consumer electronics and control equipment, lighting, SMPS, adapters and chargers, and motor control.

Working Principle

The VS-10CWH02FNTR-M3 works based on the rectification of alternating current. Alternating current, or AC, is an electrical current that alternates between two directions and is generated by many sources, including generators, power plants, and electrical substations. Rectification is the process of converting AC into direct current, or DC. In this case, the rectification process is done by the device’s five individually isolated diodes. Each diode rectifies the current that passes through it, allowing only DC to pass and blocking AC from passing. This results in a clean DC current and reduces power loss.The device also features an open drain output, which means that the output voltage is not regulated and will vary depending on the input voltage. As a result, the VS-10CWH02FNTR-M3 is best used in applications where the output voltage is not critical.The device also features a reverse current leakage of less than 70μA, which is lower than most rectifier arrays. This low reverse current leakage results in a higher efficiency, making the device ideal for applications where power consumption is critical.

Conclusion

The VS-10CWH02FNTR-M3 is a rectifier array designed for a variety of applications. It features five individually isolated outputs each rated at 1.0A and a reverse current leakage less than 70μA. As a result of its low power demands, it also works under a variety of operating temperatures, making it ideal for a variety of applications. It is particularly well-suited for applications where power demands are low and operating temperatures are high, such as laptops that are portable or exposed to direct sunlight. The device works by rectifying alternating current and features an open drain output and low reverse current leakage, making it efficient and suitable for a variety of uses.

The specific data is subject to PDF, and the above content is for reference