VS-10ETS08FP-M3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes, rectifiers and single devices play an important role in the electronics world, and the VS-10ETS08FP-M3 is no exception. This versatile diode opto-coupler is designed to provide a solid isolating connection between electrical signals while maintaining a low capacitance, low voltage level and low noise operation.

The VS-10ETS08FP-M3 provides isolation between input and output circuits with a dielectric strength of 8kVac. It is capable of conducting 1000V RMS for one minute and features an insulation resistance of up to 100MΩ between pins at 500Vdc. It is suitable for input voltage of up to 12 V AC or DC. The VS-10ETS08FP-M3 have a maximum current of 10mA through the LED and a common terminal of 150Ω. The typical rise and fall time is 3.5μs (10-90%) and a typical propagation delay of 11μs.

The VS-10ETS08FP-M3 is designed with an LED coupled opto-isolator, which isolates an electrical source from the output. The LED transmits light when the input voltage is applied, and upon sensing the light, the IC turns on or off, generating the corresponding output voltage. The ground or reference voltage of the output circuit is separate from the ground or reference voltage of the input circuit. This provides an insulated connection between the two circuits, allowing them to act independently.

The VS-10ETS08FP-M3 is designed to offer noise protection by suppressing electrical noise in switching power supplies, UPS systems, inverters and current loops. It is suitable for use in high voltage and sensitive areas where reliability and noise immunity are important. It can also be used for logic level conversion in control circuits and logic systems. It is a reliable and robust opto-isolator with low power consumption, making it suitable for a wide variety of applications.

The VS-10ETS08FP-M3 can also be used as a replacement for solid state relays, which often require more power and present more problems in terms of noise and reliability. The VS-10ETS08FP-M3 offers a lower power consumption than relays, and the isolating circuit eliminates the need for additional input transformers. It also provides a high level of protection against high-voltage surges and EMI/RFI interference.

In conclusion, the VS-10ETS08FP-M3 is a reliable and versatile opto-coupler designed to provide a strong isolating connection between electrical signals while maintaining low capacitance and low-level noise operation. It is suitable for a wide range of applications, including switching power supplies, UPS systems, inverters, control circuits, logic level conversion and current loops. By providing high levels of protection against high-voltage surges, EMI/RFI interference and noise, the VS-10ETS08FP-M3 is an ideal solution for any application that requires an insulated and reliable connection.

The specific data is subject to PDF, and the above content is for reference