VS-10RIA100

Current - Hold (Ih) (Max):	130mA
Base Part Number:	10RIA*
Supplier Device Package:	TO-208AA (TO-48)
Package / Case:	TO-208AA, TO-48-3, Stud
Mounting Type:	Chassis, Stud Mount
Operating Temperature:	-65°C ~ 125°C
SCR Type:	Standard Recovery
Current - Non Rep. Surge 50, 60Hz (Itsm):	225A, 240A
Current - Off State (Max):	10mA
Series:	--
Current - On State (It (RMS)) (Max):	25A
Current - On State (It (AV)) (Max):	10A
Voltage - On State (Vtm) (Max):	1.75V
Current - Gate Trigger (Igt) (Max):	60mA
Voltage - Gate Trigger (Vgt) (Max):	2V
Voltage - Off State:	1kV
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - SCRs Introduction

Thyristors are a type of semiconductor device that is used to control electrical power. Thyristors are essentially semiconductor switches that can be triggered on, off, or either with an applied voltage. SCR, or Silicon Controlled Rectifiers, are one type of thyristor, and are commonly categorized based on the type of trigger required to turn on, such as signal trigger, pulsed trigger, or self-latching. The VS-10RIA100 is an SCR thyristor from NXP Semiconductors. It is a three-quadrant device, often used for industrial control applications and is a type of silicon-controlled rectifier (SCR). This device is designed for use in applications that require high-speed, low-voltage operation.

VS-10RIA100 Application Field

The VS-10RIA100 can be applied to a variety of different applications in the industrial control field. These applications include high speed, low voltage AC power controllers, over-voltage and under-voltage protection, crystal ovens, and lightning suppression. The device is particularly suited for high-voltage AC control applications in inverters and phase controllers due to its low on-state voltage drop and fast turn-on time. It is also well suited for other control applications, such as dynamic braking control, phase angle control, and temperature control. In addition, this device can be used in rectifier circuits, dynamic brake systems, and DC motor drives.

VS-10RIA100 Working Principle

The VS-10RIA100 SCR device works on the principle of triggering or gating an electric current between two opposite polarity power terminals when an electric voltage is applied between the gate and cathode terminals. This current flows through the device and will remain on until a negative voltage is applied to the gate terminal, or the current through the device drops to zero. The device has a maximum gate current rating of 10mA, which allows for precise control of the on-state current. It also features a low gate trigger current of 20mA, making it suitable for use in applications requiring high switching speeds. In addition, this device features a maximum turn-on voltage rating of 25V and a 7A maximum average on-state current rating.

Conclusion

The VS-10RIA100 SCR thyristor from NXP Semiconductors is designed for use in a variety of industrial control applications that require high-speed, low-voltage operation. This device is well suited for use in rectifier circuits, dynamic brake systems, and DC motor drives. It features a maximum gate current rating of 10mA, which allows for precise control of the on-state current and its low gate trigger current makes it suitable for use in applications requiring high switching speeds. The device is a three-quadrant device, often used for industrial control applications and is a type of silicon-controlled rectifier (SCR).

The specific data is subject to PDF, and the above content is for reference