VS-10TTS08-M3

Current - On State (It (RMS)) (Max):	10A
Supplier Device Package:	TO-220AB
Package / Case:	TO-220-3
Mounting Type:	Through Hole
Operating Temperature:	-40°C ~ 125°C
SCR Type:	Standard Recovery
Current - Non Rep. Surge 50, 60Hz (Itsm):	95A @ 50Hz
Current - Off State (Max):	1mA
Current - Hold (Ih) (Max):	30mA
Series:	--
Current - On State (It (AV)) (Max):	6.5A
Voltage - On State (Vtm) (Max):	1.15V
Current - Gate Trigger (Igt) (Max):	15mA
Voltage - Gate Trigger (Vgt) (Max):	1V
Voltage - Off State:	800V
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - SCRs

A thyristor, also known as an SCR or Silicon Controlled Rectifier, is an electrical device used to control and switch the flow of an electric current. The VS-10TTS08-M3 is one such thyristor, and is typically used for controlling various types of electrical equipment. This article looks at the application fields and working principles of the VS-10TTS08-M3.

Application Fields of the VS-10TTS08-M3

The VS-10TTS08-M3 is an SCR module designed for high-speed, high-voltage use in various industries. It is primarily used in power equipment such as power conditioning systems and energy-saving units, as well as in battery chargers, converters, remote control systems and programmable logic controllers. The thyristor can also be used in electronic switching systems,AC motor/generator control and motor speed control.

Working Principle of the VS-10TTS08-M3

The VS-10TTS08-M3 is a four-quadrant alternating-current (AC) rectifier with unidirectional switching capability. It consists of two semiconductor components: a diode and a triode. These two components are arranged in a single integrated package with two independent terminals. The device works by controlling the rectification of alternating electrical current. When the thyristor is in a current conducting state, the current conducting path is formed between the anode (A) and the cathode (C) of the thyristor. When the thyristor is in a blocked state, the current will not pass through the anode and cathode. The device can be triggered in two different ways: four-quadrant triggering and single-quadrant triggering. In four-quadrant triggering, both positive and negative signals can be applied to the gate to turn the thyristor on and off. In single-quadrant triggering, only positive voltage can be applied to the gate, and the thyristor will turn on and off depending on the polarity of the applied voltage.

Conclusion

The VS-10TTS08-M3 is a thyristor module commonly used in power equipment and electronic switching systems. The device works by controlling the rectification of alternating electrical current, and can be triggered in two different ways: four-quadrant triggering and single-quadrant triggering. With its high-speed and high-voltage operations, the VS-10TTS08-M3 is a reliable choice for many industrial applications.

The specific data is subject to PDF, and the above content is for reference