VS-10TTS08PBF Allicdata Electronics
Allicdata Part #:

10TTS08PBF-ND

Manufacturer Part#:

VS-10TTS08PBF

Price: $ 0.00
Product Category:

Discrete Semiconductor Products

Manufacturer: Vishay Semiconductor Diodes Division
Short Description: SCR PHASE CONT 800V 10A TO220AC
More Detail: SCR 800V 10A Standard Recovery Through Hole TO-220...
DataSheet: VS-10TTS08PBF datasheetVS-10TTS08PBF Datasheet/PDF
Quantity: 1000
1 +: 0.00000
Stock 1000Can Ship Immediately
$ 0
Specifications
Series: --
Part Status: Discontinued at Digi-Key
Voltage - Off State: 800V
Voltage - Gate Trigger (Vgt) (Max): 1V
Current - Gate Trigger (Igt) (Max): 15mA
Voltage - On State (Vtm) (Max): 1.15V
Current - On State (It (AV)) (Max): 6.5A
Current - On State (It (RMS)) (Max): 10A
Current - Hold (Ih) (Max): 30mA
Current - Off State (Max): 1mA
Current - Non Rep. Surge 50, 60Hz (Itsm): 95A, 110A
SCR Type: Standard Recovery
Operating Temperature: -40°C ~ 125°C (TJ)
Mounting Type: Through Hole
Package / Case: TO-220-3
Supplier Device Package: TO-220AB
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are one of the most important components used in power electronics systems. Among these components, SCRs (silicon controlled rectifiers) are the most commonly used for applications involving voltage and current control, regulation, and protection. The VS-10TTS08PBF is an SCR with two gate pins for bidirectional control. It is mainly used for industrial purposes, particularly in load switching and AC voltage control, due to its high bidirectional blocking capability and ruggedness.

The VS-10TTS08PBF is a silicon-controlled rectifier with a maximum current rating of 10A and a voltage rating of 400V. It is built on a hermetically sealed ceramic TO-220AB package, providing superior protection against moisture, dust, and corrosion. The bidirectional gate control ensures quick and highly reliable switching operations with minimal losses. It has a temperature range of -25°C to +100°C, making it suitable for use in harsh industrial and outdoor environments.

In an SCR, the P-N junction is used to control current or voltage, depending on the type of SCR. The VS-10TTS08PBF is a thyristor type of SCR. When the gate pin is connected to a positive voltage, the gate current increases, triggering a flow of current through the P-N junction, thereby allowing conduction in only one direction. When the gate current is reduced, the SCR turns off, preventing further current flow in either direction.

The VS-10TTS08PBF is primarily used for controlling AC signals, switching loads, controlling motors, and providing protection against overloads and power surges. In addition, its bidirectional blocking capability enables it to be used in circuits where the current flow must be blocked in both directions. This makes it an ideal choice for applications in engineering and industrial motor control, power switching, and power conversion.

The VS-10TTS08PBF is an ideal choice for many types of industrial applications, due to its high reliability, ruggedness and bidirectional current control. Its compact size and hermetically sealed package provide superior protection from external environmental hazards. When properly used, this SCR can provide reliable and long-term operation for a variety of industrial applications.

The specific data is subject to PDF, and the above content is for reference

Latest Products
CR12CM-12B#BH0

THYRISTOR 600V 12A TO220SCR 600V 18.8A S...

CR12CM-12B#BH0 Allicdata Electronics
NCR100W-10LX

NCR100W-10L/SC-73/REEL 7" Q1/TSCR 850V 1...

NCR100W-10LX Allicdata Electronics
BT169H,112

SCR SENS 800V 800MA TO92-3SCR 800V 800mA...

BT169H,112 Allicdata Electronics
BT149B,126

THYRISTOR 200V 0.8A SOT54SCR 200V 800mA ...

BT149B,126 Allicdata Electronics
CR8CM-12B#BH0

THYRISTOR 600V 8A TO220SCR 600V 12.6A St...

CR8CM-12B#BH0 Allicdata Electronics
CR6CM-12B#BH0

THYRISTOR 600V 6A TO220SCR 600V 9.4A Sta...

CR6CM-12B#BH0 Allicdata Electronics