VS-10TTS08S-M3

Current - On State (It (RMS)) (Max):	10A
Supplier Device Package:	D2PAK
Package / Case:	TO-263-3, D²Pak (2 Leads + Tab), TO-263AB
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 125°C
SCR Type:	Standard Recovery
Current - Non Rep. Surge 50, 60Hz (Itsm):	95A, 110A
Current - Off State (Max):	1mA
Current - Hold (Ih) (Max):	30mA
Series:	--
Current - On State (It (AV)) (Max):	6.5A
Voltage - On State (Vtm) (Max):	1.15V
Current - Gate Trigger (Igt) (Max):	15mA
Voltage - Gate Trigger (Vgt) (Max):	1V
Voltage - Off State:	800V
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - SCRs serve a variety of electronic applications, commonly referred to as switch-mode power controllers, AC regulators, and AC switchers. They are widely used to control the flow of currents, either from an AC to a DC source, or from DC to an AC source. The VS-10TTS08S-M3 is a type of silicon controlled rectifier, or SCR, that has been specifically designed for switching applications.The VS-10TTS08S-M3 is a general purpose, three-terminal SCR, suitable for a wide range of applications. It is capable of supplying current up to 10 Amps, and can switch at a rate of up to 25,000 times per second. The device is thermally stable, with a minimum operating temperature of -55ºC and a maximum of +175ºC. It is also available with a range of gate charge variations, allowing it to be used in different applications which require different switching speeds.The VS-10TTS08S-M3 has a typical breakdown voltage of 600 volts, and can switch currents up to 10 amps, with a peak voltage rating of 830V. The switching speed is determined by the gate charge, and can range from 10kHz to 100kHz, depending on the model. Finally, the power loss is low, making it an ideal choice for applications where energy efficiency is important.The VS-10TTS08S-M3 uses a control signal to regulate the flow of current. When the gate voltage is applied to the device, it allows current flow through the Anode-Cathode path, from the Cathode to the Anode. Once the gate signal is removed, the device switches off, cutting off the flow of current.The operating principle of the VS-10TTS08S-M3 is relatively simple. When a positive potential is applied to the gate terminal, the device begins to conduct. The flow of current is regulated by controlling the gate voltage, enabling the device to be used in many different applications such as motor control and power supplies. Additionally, by controlling the gate voltage, the device can be used as either an on/off switch, or a variable speed switch.The VS-10TTS08S-M3 is a great option for applications that require a fast switching speed, high amperage, broad temperature range, and low power loss. It is suitable for a wide range of different applications, including motor control, power supplies, and AC/DC converters, to name a few.

The specific data is subject to PDF, and the above content is for reference