VS-18TT045-F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The VS-18TT045-F is a single diode rectifier with a variety of uses. It has two different roles depending on the direction of current flow. It can act as a free-wheeling diode or can be connected as a rectifier. It is also a high-efficiency switching diode, capable of switching at 3 amps even at temperatures as high as 100 degrees Celsius.

When used as a free-wheeling or fly-back diode, the VS-18TT045-F quickly disconnects the load from the power source when the voltage drops below the forward threshold. This can be used to provide a power boost when the main source is not supplying sufficient energy. In this mode, the diode is connected in parallel with the load, which allows the current to flow from either source, whichever is providing higher voltage at that time.

In rectification mode, the VS-18TT045-F acts as a rectifier, allowing current to pass in one direction only. This enables AC to be converted to DC, for use in power supplies and other power conversion applications. The peak inverse voltage is rated at 40 volts and the forward current is 3 amps. Operating temperature is specified between -55 Celsius to 100 Celsius.

The VS-18TT045-F is widely used in LED drivers, appliance and electronic lighting applications. It has a small size and good heat dissipation, which make it suitable for high density packaging. It is also used in motor control, power supplies, and surge protection circuits, where the fast switching characteristic of this diode is beneficial.

The VS-18TT045-F has good capacitance performance, low thermal resistance and fast switching. The device is featured by its high forward surge current, low operating voltage, and low leakage current, which makes it an attractive option for many types of rectification applications. Its tolerance to high temperature makes it a reliable choice for applications with an operating environment of up to 100°C.

The VS-18TT045-F is easy to mount on a printed circuit board and its ultra-compact size allows for space-saving designs. The internal construction of the diode includes a resin coating, an anode, a cathode and an oxides diffusion layer. The anode is constructed of silicon and the cathode of either aluminum or silicon depending on the device version. The oxide layer is formed using a special thermal process.

The working principle of the VS-18TT045-F is simple. When the voltage is higher on the anode than the cathode, then the diode is turned on and allows the current to pass through it, while when the voltage is higher on the cathode than the anode, then the diode is turned off and no current flows through it. This type of diode is especially useful in lower voltage applications and is rated to be used at up to 40V.

The VS-18TT045-F is a high efficiency and cost-effective single diode rectifier. It is a reliable component for use in AC to DC conversion applications. It offers a variety of features such as low operating temperature, fast switching ability, high surge current and good capacitance, which make it suitable for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference