VS-1N1184RA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are commonly used components in electronics and their applications run the gamut of needs. The VS-1N1184RA is a single rectifier diode, and it can be used in a number of high power applications. It has a reverse voltage of 800V and a forward current of 1A. In this article, we will look at the VS-1N1184RA application field, its working principle, and other important considerations.

The VS-1N1184RA can be used in a variety of applications. It is suitable for AC/DC conversion, such as in the rectification of AC power, and in high power switching operations. It is also useful for applications in power supplies, rectifying converters, and other circuit applications. Furthermore, the VS-1N1184RA is capable of withstanding higher temperatures, making it ideal for use in automotive and industrial applications.

The VS-1N1184RA rectifier diode works by allowing current to flow in one direction only. This is accomplished by the presence of a junction between two layers of semiconductor materials, known as p and n type layers. If a positive voltage is applied to the anode (p type) of the diode, the p and n layers begin to repel each other and this causes the diode to become ‘on’; current then moves through the diode at a specified rate. If a negative voltage is applied to the anode, the p and n layers attract each other, and the diode becomes ‘off’; no current flow is allowed through the diode. When a diode is in the ‘on’ state (forward biased), the current through the diode follows Ohm’s law, i.e. V = IR, where V is the applied voltage, I is the current, and R is the diode’s resistance. The VS-1N1184RA has a forward voltage drop of 1.2V, and a reverse voltage drop of 800V.

When selecting a diode for an application, one should consider the peak and average current values, and the voltage ratings of the diode. The peak current specifies the maximum rated current for short durations, and it should be as close to the current anticipated during the diode’s operation as possible. It is not advisable to exceed the diode’s peak current rating, as this could damage the device. The average current rating specifies the recommended current that can be applied to the device without exceeding its maximum ratings. If the currents within the circuit vary significantly, the average current should be chosen to match the highest anticipated current. For the VS-1N1184RA, the peak current is 1A and the average current is 0.5A.

Once the peak and average current ratings are chosen, the voltage ratings of the diode need to be considered. The diode should be able to handle the actual voltages within the application; it should have a forward voltage rating that is greater than the maximum supply voltage. The VS-1N1184RA has a reverse voltage rating of 800V and a forward voltage rating of 1.2V. When selecting a diode, it is important to also consider the environment in which the device will be operating. For instance, if a diode will be used in a high-temperature application, such as in an automotive device, it needs to be able to withstand increased temperatures. The VS-1N1184RA can operate at temperatures up to 150°C.

The VS-1N1184RA is a single rectifier diode that can be used in a variety of high power applications. It has a reverse voltage of 800V and a forward current of 1A, and it can withstand temperatures up to 150°C. The peak and average current ratings of the device, as well as its voltage ratings must be taken into account when selecting the diode for a particular application.

The specific data is subject to PDF, and the above content is for reference