VS-1N3212R

Series:	--
Packaging:	Bulk
Part Status:	Active
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	400V
Current - Average Rectified (Io):	15A
Voltage - Forward (Vf) (Max) @ If:	1.5V @ 15A
Speed:	Standard Recovery >500ns, > 200mA (Io)
Current - Reverse Leakage @ Vr:	10mA @ 400V
Capacitance @ Vr, F:	--
Mounting Type:	Chassis, Stud Mount
Package / Case:	DO-203AB, DO-5, Stud
Supplier Device Package:	DO-203AB
Operating Temperature - Junction:	-65°C ~ 175°C
Base Part Number:	1N3212

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

VS-1N3212R is a type of diode rectifier, single component that provides an ideal fit for many power management applications. It is a low-voltage component with a maximum reverse voltage rating of 500 volts (V) and forward current rating of 3 amps (A). These features make this component a popular choice for many power supply circuits, rectifiers, and other power management applications.

VS-1N3212R Application Field

VS-1N3212R components are used in power supply and rectifier applications in various types of domestic and industrial equipment. Its primary purpose is to convert alternating current (AC) into direct current (DC). This component can be used for many power management applications such as voltage converters, invertors, and transient suppression. The rectifier also has applications in voltage regulation, power electronics, and power factor correction.

VS-1N3212R Working Principle

The VS-1N3212R component employs two distinct rectifier circuits. The first is the half-wave rectifier. In this circuit, the current only passes during the positive half-cycle of the AC voltage. It is used in power supplies with limited current demands, such as those found in low-power lamp circuits.The second type of rectifier circuits employed by the VS-1N3212R component is the full-wave rectifier. In this circuit, the current passes during both the positive and negative half-cycles of the voltage. This rectifier is used in power supplies with large current demands, such as those found in electric motors.The working of the VS-1N3212R is based on two basic concepts: forward biasing and reverse biasing. When the diode is forward biased, current flows easily through the component due to the negligible voltage drop. Therefore, the diode acts as a conductor when the electric field acts in the same direction as that of the diode. On the other hand, when the diode is reverse biased, an electric field with an opposite direction to the diode exists in the device, and current cannot pass through the component. In this case, the diode acts as an insulator.

Conclusion

In conclusion, VS-1N3212R components are single-diode rectifiers ideal for many power management applications including voltage converters, invertors, voltage regulation, power electronics, and power factor correction. The device operates based on forward and reverse biasing, allowing current to pass through the component when it is forward biased, and blocking current when it is reverse biased. VS-1N3212R components are available for many types of domestic and industrial equipment, and are a reliable source for power and rectifiers.

The specific data is subject to PDF, and the above content is for reference