Allicdata Part #: | VS-20CTQ150-1-M3-ND |
Manufacturer Part#: |
VS-20CTQ150-1-M3 |
Price: | $ 0.55 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Vishay Semiconductor Diodes Division |
Short Description: | DIODE SCHOTTKY 150V 10A TO262 |
More Detail: | Diode Array 1 Pair Common Cathode Schottky 150V 10... |
DataSheet: | VS-20CTQ150-1-M3 Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 0.49618 |
Series: | Automotive, AEC-Q101 |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Diode Configuration: | 1 Pair Common Cathode |
Diode Type: | Schottky |
Voltage - DC Reverse (Vr) (Max): | 150V |
Current - Average Rectified (Io) (per Diode): | 10A |
Voltage - Forward (Vf) (Max) @ If: | 880mV @ 10A |
Speed: | Fast Recovery = 200mA (Io) |
Current - Reverse Leakage @ Vr: | 25µA @ 150V |
Operating Temperature - Junction: | -55°C ~ 175°C |
Mounting Type: | Through Hole |
Package / Case: | TO-262-3 Long Leads, I²Pak, TO-262AA |
Supplier Device Package: | TO-262-3 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The VS-20CTQ150-1-M3 is a type of rectifier array that is widely used in a variety of applications. It is part of an array of rectifier type diodes that can be utilized in both commercial and industrial applications. In addition, these rectifier arrays are also used in automotive, telecom and military applications. This diode array consists of two diodes connected in Series, each with a reverse voltage of up to 150V, and can provide up to 2A of current.
Primarily, the VS-20CTQ150-1-M3 diodes are used to convert AC power into DC power. This is known as ‘rectification’. Rectifiers are most commonly used in power supplies, where they transform alternating current into direct current, which reduces the need for an additional transformer. Additionally, they can be used to create a filtering effect to stabilize voltages from fluctuating loads. In other applications, rectifiers can be used as a low-cost alternative to linear regulators, which require larger amounts of power and a more complex control system.
The working principle of a VS-20CTQ150-1-M3 rectifier array is simple: when voltage is applied to the anode end of a diode, current is allowed to flow in a single direction - from the anode to the cathode end. The only way for the current to flow the opposite direction is by applying a voltage higher than the reverse voltage rating. This same principle is used in both bridge and full-wave rectifiers, with the diodes laid out in either a single linear or full bridge configuration. The benefit of such an arrangement is that it eliminates the need for a transformer, reducing the overall cost and complexity of a power discharge system.
The VS-20CTQ150-1-M3 is a versatile diode array that can be used in a variety of applications. Given its ability to convert alternating current (AC) power into direct current (DC) power, it is often used in power supplies to minimize the amount of energy that is lost in conversion. Similarly, these rectifiers can be used as part of an array of diodes to act as a low-cost voltage regulator without needing to resort to a larger and more complex linear regulator setup. In addition, the array’s ability to reduce fluctuations in voltage and create a sense of stability, makes it a perfect choice for use in a variety of applications.
The specific data is subject to PDF, and the above content is for reference
DIODE SILICON 650V 17A TO220Diode Array ...
DIODE MODULE 600V 35A SM4Diode Array 1 P...
DIODE MODULE 1.8KV 120A D1Diode Array 1 ...
DIODE ARRAY SCHOTTKY 35V TO220ABDiode Ar...
DIODE MODULE 1.4KV 59ADiode Array 1 Pair...
DIODE ARRAY GP 400V 20A TO3PNDiode Array...