VS-25TTS08S-M3

Current - On State (It (RMS)) (Max):	25A
Supplier Device Package:	TO-263AB (D²PAK)
Package / Case:	TO-263-3, D²Pak (2 Leads + Tab), TO-263AB
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 125°C
SCR Type:	Standard Recovery
Current - Non Rep. Surge 50, 60Hz (Itsm):	350A @ 50Hz
Current - Off State (Max):	10mA
Current - Hold (Ih) (Max):	150mA
Series:	--
Current - On State (It (AV)) (Max):	16A
Voltage - On State (Vtm) (Max):	1.25V
Current - Gate Trigger (Igt) (Max):	45mA
Voltage - Gate Trigger (Vgt) (Max):	2V
Voltage - Off State:	800V
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - SCRs: VS-25TTS08S-M3 Application Field and Working PrincipleThyristors, also known as silicon controlled rectifiers (SCRs), are electronic components used to control electric power in electronic systems. They are used in a variety of applications, ranging from motor control and lighting to sensing and actuating. The VS-25TTS08S-M3 is an SCR-based thyristor with an application field that includes motor control, lighting control, energy storage, resistive switching and more. This article will explore the application field and working principle behind the VS-25TTS08S-M3.The application field for the VS-25TTS08S-M3 can be broadly divided into two parts: power control and non-power control. For power control, the VS-25TTS08S-M3 can be used in motor control, lighting control and energy storage. It can be used to regulate the amount of power that is supplied to the motor in order to adjust its speed or other aspects of its operation. It can also be used to control the level of lighting in an area, as well as to store energy for later release. This makes it useful in applications that require precise control of power.The second part of the application field is non-power control. This includes resistive switching, signal control, signal conditioning, signal routing, and more. The VS-25TTS08S-M3 is suitable for applications where precise control over signals is required, such as signal routing or signal conditioning. It is also used in some signal control applications, such as driving LEDs or other actuators.The working principle of the VS-25TTS08S-M3 is based on a thyristor, or Silicon Controlled Rectifier (SCR). An SCR is a three-terminal device that uses an alternating current (AC) signal as the control signal. When the control signal is applied, the SCR will turn on and allow a current to pass through it. When the control signal is removed, the SCR will turn off and stop the current from passing through it.The VS-25TTS08S-M3 is a three-terminal device, which can be mounted directly on a Printed Circuit Board (PCB). It has two terminals, the anode and the cathode, which are connected to the circuit board via a pair of solder points. The third terminal, the Control, is connected to the external control voltage.The VS-25TTS08S-M3 operates in a bistable mode. When the control voltage is below a certain threshold, the device is off and no current passes through it. However, when the control voltage is increased above the threshold, the device will turn on and allow for current to pass through it. The amount of current that can be passed through the device is determined by the Control Voltage.The VS-25TTS08S-M3 is widely used in a variety of applications. It is ideal for motor control, lighting control, energy storage, resistive switching, and signal control and conditioning applications. Its reliable and precise switching capabilities make it an ideal choice for many types of power and signal control needs.

The specific data is subject to PDF, and the above content is for reference