VS-25TTS12-M3 Allicdata Electronics
Allicdata Part #:

VS-25TTS12-M3-ND

Manufacturer Part#:

VS-25TTS12-M3

Price: $ 1.74
Product Category:

Discrete Semiconductor Products

Manufacturer: Vishay Semiconductor Diodes Division
Short Description: SCR 1200V 25A TO-220AB
More Detail: SCR 1.2kV 25A Standard Recovery Through Hole TO-22...
DataSheet: VS-25TTS12-M3 datasheetVS-25TTS12-M3 Datasheet/PDF
Quantity: 1000
1000 +: $ 1.57641
Stock 1000Can Ship Immediately
$ 1.74
Specifications
Current - On State (It (RMS)) (Max): 25A
Supplier Device Package: TO-220AB
Package / Case: TO-220-3
Mounting Type: Through Hole
Operating Temperature: -40°C ~ 125°C
SCR Type: Standard Recovery
Current - Non Rep. Surge 50, 60Hz (Itsm): 270A @ 50Hz
Current - Off State (Max): 500µA
Current - Hold (Ih) (Max): 150mA
Series: --
Current - On State (It (AV)) (Max): 16A
Voltage - On State (Vtm) (Max): 1.25V
Current - Gate Trigger (Igt) (Max): 45mA
Voltage - Gate Trigger (Vgt) (Max): 2V
Voltage - Off State: 1.2kV
Part Status: Active
Packaging: Tube 
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - SCRs

Thyristors are used in many electronic devices, such as power controllers and computer interface circuits. One common type of thyristor is known as the Silicon Controlled Rectifier (SCR), and the VS-25TTS12-M3 is a SCR that may be used for a variety of applications.

VS-25TTS12-M3 Application Field

The VS-25TTS12-M3 is a low current SCR used in power control applications. It is designed to trigger or turn on and off at a specific voltage and current level. This SCR is used for applications such as surge protection and DC power supplies. It is also used as a switching device in motor control, lighting control and ignition systems. It can be used in combination with a capacitor or resistor to create a power surge protector or AC motor control circuit.

Working Principle

The SCR is made up of four layers of doped silicon. Each layer has an alternate kind of junction, such as an anode, cathode, and a gate. When the gate is not triggered, the anode and cathode remain off, and the SCR is in its nonconductive state. When a voltage is applied to the gate, it allows current to flow between the anode and cathode. This creates a switching effect that allows the SCR to turn on and off, depending on the voltage and current levels. The VS-25TTS12-M3, specifically, is able to turn on and off at a low current, which makes it ideal for applications such as surge protection and DC power supplies.

Conclusion

The VS-25TTS12-M3 is a low current SCR that is used in many power control applications. Its ability to switch on and off at specific voltage and current levels makes it ideal for applications such as surge protection and DC power supplies, as well as motor control, lighting control and ignition systems. Its four layers of doped silicon allow it to accurately turn on and off, creating the switching effect required for these applications.

The specific data is subject to PDF, and the above content is for reference

Latest Products
CR12CM-12B#BH0

THYRISTOR 600V 12A TO220SCR 600V 18.8A S...

CR12CM-12B#BH0 Allicdata Electronics
NCR100W-10LX

NCR100W-10L/SC-73/REEL 7" Q1/TSCR 850V 1...

NCR100W-10LX Allicdata Electronics
BT169H,112

SCR SENS 800V 800MA TO92-3SCR 800V 800mA...

BT169H,112 Allicdata Electronics
BT149B,126

THYRISTOR 200V 0.8A SOT54SCR 200V 800mA ...

BT149B,126 Allicdata Electronics
CR8CM-12B#BH0

THYRISTOR 600V 8A TO220SCR 600V 12.6A St...

CR8CM-12B#BH0 Allicdata Electronics
CR6CM-12B#BH0

THYRISTOR 600V 6A TO220SCR 600V 9.4A Sta...

CR6CM-12B#BH0 Allicdata Electronics