VS-25TTS12STRR-M3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - SCRs

The VS-25TTS12STRR-M3 belongs to a type of thyristor known as a silicon-controlled rectifier (SCR). SCRs are an evolution of the basic thyristor and are designed in such a way that they can be turned on and left on through the application of an external current source. The SCR is a member of the thyristor family of power semiconductor devices, though unlike other thyristors, it sends a single pulse of current through the device and is then held in its “on” state until the current is reduced below the minimum holding level. This is a highly advantageous characteristic for systems requiring the control of high power at low voltage levels.

Application Fields of the VS-25TTS12STRR-M3

The VS-25TTS12STRR-M3 has wide ranging applications due to its unique characteristics, such as the ability to deliver current with very low voltage drops. This low voltage drop enables the device to function effectively in applications requiring low power and/or sensitive circuitry, such as battery charging, solar energy conversion, temperature control, motor speed control, and motion control. It is also used for applications in consumer and industrial electronics, such as consumer electronics, communication devices, sensors, digital logic, distributed systems and other components.

Working Principle of the VS-25TTS12STRR-M3

The operation of the VS-25TTS12STRR-M3 is based on the principle of a unidirectional current flow, commonly known as avalanche breakdown. In an SCR, the current flow is controlled by a gate, an element that applies a voltage or current to the SCR’s main terminals (main terminal 1 and main terminal 2) in order to turn on the SCR. The voltage applied to the gate (gate voltage) is typically much less than the main terminals (main terminal 1 and main terminal 2) voltage, and when the gate voltage reaches a certain point, the SCR turns on, allowing current to flow through it. The SCR will remain on until the current drops below a certain level called the “holding current”. In other words, the SCR is a switch that is turned on and off in response to a gate voltage, and as long as the gate voltage is applied, the SCR will remain in its on state.

It is also important to note that when the SCR is turned on, the device allows current to flow in one direction only, and will block any current flowing in the opposite direction. This is a beneficial characteristic for power systems, as it prevents the circuit from becoming overloaded.

The VS-25TTS12STRR-M3 is a special type of SCR because it is specifically designed to provide a high current flow with a low voltage drop. This is achieved by adding two additional diodes between the main terminals and the gate, to reduce the switching losses and increase efficiency. The VS-25TTS12STRR-M3 is able to achieve a current flow rate of up to 25 amperes and a voltage drop of less than 0.5 volts.

The specific data is subject to PDF, and the above content is for reference