VS-2N5205

Current - Hold (Ih) (Max):	200mA
Base Part Number:	2N52*
Supplier Device Package:	TO-208AA (TO-48)
Package / Case:	TO-208AA, TO-48-3, Stud
Mounting Type:	Chassis, Stud Mount
Operating Temperature:	-40°C ~ 125°C
SCR Type:	Standard Recovery
Current - Non Rep. Surge 50, 60Hz (Itsm):	285A, 300A
Current - Off State (Max):	2.5mA
Series:	--
Current - On State (It (RMS)) (Max):	35A
Current - On State (It (AV)) (Max):	22A
Voltage - On State (Vtm) (Max):	2.3V
Current - Gate Trigger (Igt) (Max):	40mA
Voltage - Gate Trigger (Vgt) (Max):	2V
Voltage - Off State:	800V
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - SCRsA thyristor is a type of electronic component made up of three or more semiconductor devices connected in series. The most common type of thyristor is the silicon controlled rectifier (SCR), which is a four-layer structure consisting of a p-type and an n-type semiconductor connected in series. It is also sometimes referred to as a thyristor switch or thyristor unit.The SCR is a switching element and is used to control the supply of power to a load. It is commonly used in AC (alternating current) circuits such as power supplies. The SCR can be used to control the amount of current flowing to a load by turning it on and off rapidly. It can also be used as a rectifier to convert alternating current (AC) power to direct current (DC) power.The VS-2N5205 is a thyristor SCR that is specifically designed for use in power supplies. It has a low on-state voltage drop and low gate current, making it ideal for applications where efficiency is a priority. It is able to control high currents and can handle up to 400A of continuous current.The VS-2N5205 is normally used in applications where power must be controlled for a single device or in circuits that require voltage and current control. It is commonly used in AC motor speed control, welding and induction heaters, motor starter circuits, lighting circuits and household appliances.The VS-2N5205 works by allowing electrical current to pass through only when the gate voltage is applied to it. When the gate voltage is applied, a small current passes through the gate and turns on the SCR. This allows current to pass through the SCR and reach the load. When the gate voltage is removed, the SCR is turned off and no current flows to the load.The VS-2N5205 is a reliable, cost-effective switching device that is widely used in power management applications due to its low on-state voltage drop and low gate current. This makes it perfect for controlling both high currents and energy-sensitive applications where efficiency is a priority.

The specific data is subject to PDF, and the above content is for reference