VS-30CTQ035SHM3 Allicdata Electronics
Allicdata Part #:

VS-30CTQ035SHM3-ND

Manufacturer Part#:

VS-30CTQ035SHM3

Price: $ 0.83
Product Category:

Discrete Semiconductor Products

Manufacturer: Vishay Semiconductor Diodes Division
Short Description: DIODE SCHOTTKY 35V 15A D2PAK
More Detail: Diode Array 1 Pair Common Cathode Schottky 35V 15A...
DataSheet: VS-30CTQ035SHM3 datasheetVS-30CTQ035SHM3 Datasheet/PDF
Quantity: 1000
1000 +: $ 0.74854
Stock 1000Can Ship Immediately
$ 0.83
Specifications
Series: Automotive, AEC-Q101
Packaging: Tape & Reel (TR) 
Part Status: Active
Diode Configuration: 1 Pair Common Cathode
Diode Type: Schottky
Voltage - DC Reverse (Vr) (Max): 35V
Current - Average Rectified (Io) (per Diode): 15A
Voltage - Forward (Vf) (Max) @ If: 620mV @ 15A
Speed: Fast Recovery = 200mA (Io)
Current - Reverse Leakage @ Vr: 2mA @ 35V
Operating Temperature - Junction: -55°C ~ 175°C
Mounting Type: Surface Mount
Package / Case: TO-263-3, D²Pak (2 Leads + Tab), TO-263AB
Supplier Device Package: D2PAK
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Rectifiers - Arrays form an important component of many electrical and electronic systems today. One prominent example in this regard is the VS-30CTQ035SHM3, a highly versatile rectifier diode. This diode has a clamping voltage of 30V, an average forward current of 0.035A, a peak forwad surge current of 0.25A, and a repetitive peak reverse voltage of 6V. Thanks to its wide range of specified values, the VS-30CTQ035SHM3 can be used in both low as well as high powers systems.The key purpose of a rectifier diode is to rectify an alternating current (AC) into a direct current (DC). This is achieved by using the diode in either a half-wave or a full-wave rectifier. The diode works by allowing current to flow through the p-n junction in only one direction, thus forming a unidirectional current. By connecting multiple diodes in an array, a full-wave rectifier can be formed which rectifies both the positive and the negative cycles of the AC signal.The specific application of a VS-30CTQ035SHM3 varies depending upon the type of system and its power rating. Generally, the diode is used in systems where the reverse voltage does not exceed 30V and peak forward current does not exceed 0.25A. Such systems may include generators, converters, inverters and many modern electrical and electronics systems. The diode works on the principle of the p-n junction. It features two p-doped and two n-doped superimposed layers, creating a junction between them. This junction allows current to move through the diode in only one direction - from the n-layer to the p-layer. This is due to the voltage polarity at the junction where the n-layer has a slightly negative voltage while the p-layer has a slightly positive voltage. When a positive voltage is applied to the infrastructure, it forces the electrons and the holes that are present in the junction to move in opposite directions. This reduces their potential to a point where minority charge carriers can no longer cross the junction. As a result, current can only flow from the n-layer to the p-layer and not the other way round.When connected in an array, the synchronized operation of the diodes in the VS-30CTQ035SHM3 allows for the rectification of both the positive and the negative cycles of the AC signal, thus resulting in a DC output. The VS-30CTQ035SHM3 can also be used in various other applications, such as in the switching of capacitors, in the charging of batteries and in the rectification of AC voltage spikes.In conclusion, the VS-30CTQ035SHM3 is a versatile and highly adaptable rectifier diode. The diode works on the basic principle of the p-n junction, thus allowing current to flow through it in only one direction. The diode is used in many applications where the reverse voltage does not exceed 30V, such as generators, converters, inverters, and various other electrical and electronics equipment. Utilizing multiple diodes connected in an array, the VS-30CTQ035SHM3 can also be used to create a full-wave rectifier which can rectify an AC signal into a DC output.

The specific data is subject to PDF, and the above content is for reference

Latest Products
APT10SCD65KCT

DIODE SILICON 650V 17A TO220Diode Array ...

APT10SCD65KCT Allicdata Electronics
UFT7260SM4D

DIODE MODULE 600V 35A SM4Diode Array 1 P...

UFT7260SM4D Allicdata Electronics
MSAD120-18

DIODE MODULE 1.8KV 120A D1Diode Array 1 ...

MSAD120-18 Allicdata Electronics
MBR1535CTHE3/45

DIODE ARRAY SCHOTTKY 35V TO220ABDiode Ar...

MBR1535CTHE3/45 Allicdata Electronics
QRD1415T30

DIODE MODULE 1.4KV 59ADiode Array 1 Pair...

QRD1415T30 Allicdata Electronics
FFA20U40DNTU

DIODE ARRAY GP 400V 20A TO3PNDiode Array...

FFA20U40DNTU Allicdata Electronics