VS-30WQ03FNPBF

Series:	--
Packaging:	Tube
Part Status:	Obsolete
Diode Type:	Schottky
Voltage - DC Reverse (Vr) (Max):	30V
Current - Average Rectified (Io):	3.5A
Voltage - Forward (Vf) (Max) @ If:	450mV @ 3A
Speed:	Fast Recovery = 200mA (Io)
Current - Reverse Leakage @ Vr:	2mA @ 30V
Capacitance @ Vr, F:	290pF @ 5V, 1MHz
Mounting Type:	Surface Mount
Package / Case:	TO-252-3, DPak (2 Leads + Tab), SC-63
Supplier Device Package:	D-Pak
Operating Temperature - Junction:	-40°C ~ 150°C
Base Part Number:	30WQ03

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The VS-30WQ03FNPBF is a 30A , 600V single N-Channel MOSFET that specifically designed for high efficiency and low on-state resistance. This component is widely used in many applications such as DC/DC converters, switch-mode power supplies, and motor control applications. It is also used as an on-off switch, providing control over large currents or voltages. It is available in the SOT-223 package, making it suitable for surface mount applications.The VS-30WQ03FNPBF is a compact, high performance component with a low gate charge, low on-resistance, and high threshold voltage. This component can handle high current applications and also has a low capacitance, making it suitable for high frequency applications. The component also has a high breakdown voltage, making it suitable for high power applications.The VS-30WQ03FNPBF is a single N-Channel MOSFET, meaning it is a type of diode rectifier. It consists of three pins, a source, a drain, and a gate. The three pins are connected to an external circuit and the source is connected to the positive power supply, while the drain is connected to the load. The gate is then connected to a voltage source, controlling the flow of current between the source and the drain. The MOSFET can be used as either an on-off switch or as an amplifier.In the on-off switching mode, the MOSFET acts as an open or closed circuit, depending on the gate voltage. When the gate voltage exceeds the threshold voltage, the MOSFET is turned on and will allow current flow. When the gate voltage is reduced or below the threshold voltage, the MOSFET is turned off and no current will flow. This type of switching is typically used in high current and high power applications, such as in motor controllers or power supplies.In the amplifying mode, the MOSFET is used to amplify an input signal. The input signal is connected to the gate and the source is connected to a voltage source. The amplified signal is then output to the load connected to the drain. This type of operation is used in audio applications, such as audio amplifiers or pre amplifiers.The VS-30WQ03FNPBF is a versatile component that can be used in a variety of applications. It is designed for high efficiency and low on-state resistance, making it suitable for high current and high power applications. It is available in the SOT-223 package, making it ideal for surface mount applications. Additionally, it has a low gate charge, low on-resistance, high breakdown voltage, and low capacitance, making it suitable for high frequency applications. This makes it an ideal choice for applications such as DC/DC converters, switch-mode power supplies, and motor controllers.

The specific data is subject to PDF, and the above content is for reference