VS-ETU0805-M3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes play an important role in electrical circuits since they allow current to flow in one direction, but block current flow in the opposite direction. They come in various shapes and sizes for use in different areas. The VS-ETU0805-M3 is one such type. It belongs to the family of rectifiers, more specifically single rectifiers, which are electronic components used to convert alternating current (AC) to direct current (DC).

In a single rectifier, a single diode is used to convert a sinusoidal AC into DC. When a single diode is forward biased, it allows current to flow. Depending on the choice of diode and its specific characteristics, the AC wave is rectified, or converted, into a unidirectional current in the form of a pulsating DC. Output voltage of single rectifiers is generally lower than full wave rectifiers which use two or four diodes and reduce pulsations.

The VS-ETU0805-M3 is a surface-mount ultra-fast single rectifier diode that has been specially designed for high frequency switching rectification using modern semiconductor technology. This diode is part of STMicroelectronics’ STTH08 Superfast range for power rectification and works as a highly efficient current rectifier powered by a high-grade chip.

The VS-ETU0805-M3 has a very low forward voltage of 0.115V, a fast reverse recovery time of 60nsec and reverse current maximum of 50µA. It also has an average junction temperature of 150°C and an average forward current rating of 3A. With a high switching capability, this diode has a maximum power dissipation rating of 1.65W and peak surge current rating of 28A. It is ideal for high frequency conversion applications such as switch-mode power supplies, power rectification and more.

The working of the VS-ETU0805-M3 rectifier is based on their use as a current rectifier. When a forward voltage is applied to the diode, it becomes forward-biased and allows current to pass through it. When no current is passing through the diode, it is reverse-biased and does not allow any current to flow. This cycle of forward- and reverse-bias allows for more efficient rectification of the AC wave form and produces a DC output waveform with minimal interference.

Due to its low voltage, fast switching time and high peak currents, the VS-ETU0805-M3 diode is well suited to power rectification and power switch-mode applications. It is also ideal for applications such as solar photovoltaic cells, motor control systems and other power appliances. These applications require highly efficient and high frequency power rectification, and the VS-ETU0805-M3 diode performs well as it has superior thermal management, protection against high dv/dt transients, and excellent solderability.

In conclusion, the VS-ETU0805-M3 diode is a highly efficient single rectifier which is ideal for various power rectification and power switch-mode applications. It is an ultra-fast surface-mount switch that has superior thermal management, protection against high dv/dt transients and excellent solderability. This diode has a wide range of uses, including solar photovoltaic cells, motor control systems, power rectification and more.

The specific data is subject to PDF, and the above content is for reference