VS-MBRB2080CT-M3

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Diode Configuration:	1 Pair Common Cathode
Diode Type:	Schottky
Voltage - DC Reverse (Vr) (Max):	80V
Current - Average Rectified (Io) (per Diode):	10A
Voltage - Forward (Vf) (Max) @ If:	800mV @ 10A
Speed:	Fast Recovery = 200mA (Io)
Current - Reverse Leakage @ Vr:	100µA @ 80V
Operating Temperature - Junction:	-65°C ~ 150°C
Mounting Type:	Surface Mount
Package / Case:	TO-263-3, D²Pak (2 Leads + Tab), TO-263AB
Supplier Device Package:	D2PAK

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The VS-MBRB2080CT-M3 is a common type of rectifier array manufactured by Vishay Siliconix. It is typically used in a wide range of applications such as in power conditioning systems and DC to DC converters. In this article, we’ll take a closer look at the application field and working principle of the VS-MBRB2080CT-M3.

Application Field

The VS-MBRB2080CT-M3 rectifier array is designed for use in high power applications requiring robust voltage regulation in low power and reverse current polarity protection in medium power applications. It has a wide range of applications such as in:

• High Efficiency AC-DC Converters
• Industrial DC Motor Controllers
• Uninterruptible Power Supplies (UPSs)
• High frequency telecom systems
• Smart grid power distribution systems
• Battery charge/discharge control
• LED lighting systems
• Hybrid and Electric Vehicle (HEV/EV) converters

The VS-MBRB2080CT-M3 provides a number of advantages such as low losses and improved efficiency due to its low forward voltage drop, high thermal conductivity, and low power dissipation. This allows designers to build smaller, more efficient power converters with fewer components.

Working Principle

Rectifiers are an essential component of power converters. They are used to convert an alternating current (AC) signal into direct current (DC). The VS-MBRB2080CT-M3 is a single-phase bridge rectifier array which consists of two or more rectifiers connected to form a bridge across an AC line. When connected to an AC voltage source, the bridge rectifier will pass the positive half cycles of the input AC signal through the upper rectifiers and the negative half cycles through the lower rectifiers, resulting in a full-wave rectified output. In the case of the VS-MBRB2080CT-M3, the full-wave rectified output is then filtered to create a DC voltage. The VS-MBRB2080CT-M3 is also equipped with reverse current protection which prevents the current from flowing in the reverse direction. This protects the components that are downstream from any unwanted damage. The VS-MBRB2080CT-M3 is a reliable component due to its 3A, 1kV rating and its 100% lead-free design which complies with the RoHS directive.

Conclusion

The VS-MBRB2080CT-M3 is a rectifier array with a wide range of applications. It provides high efficiency and improved thermal conductivity as well as reverse current protection which makes it a reliable component. Designers can leverage the VS-MBRB2080CT-M3 to build smaller and more efficient power converters with fewer components.

The specific data is subject to PDF, and the above content is for reference