VS-MURD620CTTR-M3 Discrete Semiconductor Products

Series:	FRED Pt®
Packaging:	Tape & Reel (TR)
Part Status:	Active
Diode Configuration:	1 Pair Common Cathode
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	200V
Current - Average Rectified (Io) (per Diode):	6A
Voltage - Forward (Vf) (Max) @ If:	1.2V @ 6A
Speed:	Fast Recovery = 200mA (Io)
Reverse Recovery Time (trr):	19ns
Current - Reverse Leakage @ Vr:	5µA @ 200V
Operating Temperature - Junction:	-65°C ~ 175°C
Mounting Type:	Surface Mount
Package / Case:	TO-252-3, DPak (2 Leads + Tab), SC-63
Supplier Device Package:	D-PAK (TO-252AA)
Base Part Number:	MURD620CT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

VS-MURD620CTTR-M3 Application Field and Working PrincipleDiodes - Rectifiers - Arrays are a type of semiconductor components typically used to convert alternating electric current (AC) to direct current (DC). The VS-MURD620CTTR-M3 is a diode rectifier bridge consisting of six rectifier diodes connected in a three-phase bridge configuration. This diodes bridge rectifier is used for various applications including AC-DC conversion, current rectification, voltage regulation, switching and snubbing.Application FieldThe VS-MURD620CTTR-M3 is an ideal rectifier for applications where it is used to adjust the input or output voltage of an electrical system. This is common in industries such as power sound systems, electric vehicles, communication equipment, and medical equipment, among others. It used for various applications including rectifying alternating current (AC) to direct current (DC), voltage regulation, and current rectification.Due to its high current and surge capability, the VS-MURD620CTTR-M3 is ideal for applications such as DC-DC converters, battery chargers, motor control applications, and other automotive applications. It is also used in power and inverter systems, robust aerospace equipment, and instrumentation and diagnostic systems.Working PrincipleThe VS-MURD620CTTR-M3 works on the principle of an electrical circuit produced by two nodes and connected by resistors, capacitors, and/or inductors. Installed with 6 diodes in a 3-phase “bridge” configuration, normal AC in the form of “loop” current flows between the nodes and then into the rectifier before being converted into DC.When AC voltage is applied to the bridge in “Normal” mode, current flows through one diode and then the other in the opposite direction. This is the case for all three of the three-phase connection points, resulting in three separate loops of current with each one producing DC output when the AC voltage is applied in the opposite direction.During this process, the AC voltage is reduced to a lower level as current is rectified into DC, while a controlled amount of voltage is supplied to protect against damage caused by over-voltage and/or under-voltage conditions. This process ensures stable operation of the system and helps avoid potential damage.The VS-MURD620CTTR-M3 can also be operated in a reversed configuration, allowing current to flow in the opposite direction and generate a negative voltage. This is useful for applications such as AC-to-DC rectification, power supply design, and switching power supplies.ConclusionThe VS-MURD620CTTR-M3 diode rectifier bridge is a versatile component which is used in a variety of applications such as AC-DC conversion, current rectification, voltage regulation, switching and snubbing. It works on the principle of an electrical circuit produced by two nodes and connected by resistors, capacitors, and/or inductors and operates in a reversed configuration to generate a negative voltage. It is an ideal rectifier for applications that require adjustment of input or output voltage, and is commonly used for industries such as power sound systems, electric vehicles, communication equipment, and medical equipment.

The specific data is subject to PDF, and the above content is for reference