VS-ST083S08PFN0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are essential in today\'s power electronics and can be divided into two main categories. The two major types of thyristors are the silicon-controlled rectifier (SCR) and the gate turn-off thyristor (GTO). In this article, we will be discussing the application field and working principle of the SCR, specifically the VS-ST083S08PFN0.

Introduction

Thyristors are solid-state semiconductor devices that act like a switch. These devices are used to regulate and manage an electrical current by controlling the flow of electricity in an electric circuit. They are used in a wide variety of applications from consumer electronics to large industrial applications such as variable-speed drives, lighting control, motor control, etc. SCRs are the most common type of thyristors and are widely used in many electrical systems. They are especially useful for controlling and switching large currents in applications such as electric arc furnaces, welding equipment, and electric motor drives.

The VS-ST083S08PFN0 device

The VS-ST083S08PFN0 is a SCR device, specially designed for industrial applications. This 5 pin SCR device is an ideal device for controlling power, in applications such as welding equipment, electric arc furnaces, and electric motor drives. Its relatively small size and pinouts make it easy to install, while its robust design ensures a long service life. It is rated for a working current of 8 Amps, and a peak current of 150 Amps. Its maximum voltage rating is 800V, and it has a capacitance of 6.3pF at 1kHz. It has an insulation rating of 4.5kV. The device is also RoHS compliant and is available in both standard and lead-free versions.

Working principle

The VS-ST083S08PFN0 device operates using a four-layer silicon semiconductor structure. It consists of an anode, cathode and two control electrodes (the Gate and the Trigger). When the Gate voltage is applied, the SCR is triggered and the device is turned on, allowing current to flow through it. The Trigger is used to control the Gate voltage, so that the SCR can be turned on and off as necessary. The device has a built-in holding current which ensures that it stays on even when the control voltage is removed. This is useful in applications where a continuous flow of current is required.

Application field

The VS-ST083S08PFN0 is most commonly used for controlling large currents in applications such as electric arc furnaces, welder equipment, and electric motor drives. It is also used for welding and zinc plating, as well as for lighting control and electric heaters. The device is perfect for use in industrial power electronics and is suitable for use in commercial and residential applications.

Conclusion

The VS-ST083S08PFN0 is a 5 pin SCR device which is ideal for controlling power in industrial applications. The device is rated for a working current of 8Amps and a peak current of 150Amps, and it has a capacitance of 6.3pF at 1kHz. The device has a built-in holding current, which ensures that it stays on even when the control voltage is removed. The VS-ST083S08PFN0 is commonly used for controlling large currents in electric arc furnaces, welding equipment, and electric motor drives, as well as for welding and zinc plating. The device is perfect for use in industrial power electronics and is suitable for use in commercial and residential applications.

The specific data is subject to PDF, and the above content is for reference