VS-ST083S12PFK0L

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - SCRs

A silicon-controlled rectifier (SCR) is a three-terminal electronic control device that acts as a switch or a regulator, using the power of electricity to control other electrical components. SCRs are also referred to as thyristors, and as such, they are an important component in industrial automation and control systems. The most common type of SCR is the VS-ST083S12PFK0L, which has three active terminals, one anode and two cathodes. It is used in the control of AC loads and the overcurrent protection of circuits.

Application Field

The VS-ST083S12PFK0L is specifically designed for use in AC switching and controlling applications. It is suitable for lightening equipments, electric heater, automated controlling systems, and various types of electrical equipment and motors. This type of SCR provides reliable overcurrent protection when combined with a suitable trip circuit.

The VS-ST083S12PFK0L can be used as an AC switch in combination with a suitable trip circuit, a voltage-sensing SCR, or a power line monitor module. It can also be used in applications such as three-phase AC load control, motor speed control, and speed dimming applications. This SCR is particularly suitable for use in electric power appliances.

In the HVAC (heating, ventilation, and air conditioning) industry, the VS-ST083S12PFK0L SCR enables the timing control of various functions such as fan control, temperature control, time delays and cycle controls. This SCR is most commonly found in AC controls and fan speed controllers in AC systems.

Working Principle

The VS-ST083S12PFK0L SCR consists of three active terminals – gate, anode, and cathode. When the voltage (V) across the gate terminal is less than Vg, the SCR conducts current and acts as an open switch. When the Vg reaches a given level, the SCR will turn off and not allow any current to flow.

The SCR can be used to regulate or control AC loads. This is accomplished through the use of a trip circuit connected to the gate terminal of the SCR. When the current in the load approaches the desired value, the trip circuit will generate a gate voltage that will turn off the SCR and stop the current flow. This will prevent overloads and damage to the load.

The VS-ST083S12PFK0L SCR can also be used as a protection device when combined with a suitable trip circuit. In this instance, it is used to provide overcurrent protection for circuits. When the current in the circuit exceeds the trip circuit’s set values, the trip circuit will activate the SCR and break the connection in the circuit. This will ensure the safe operation and prevent further current overload.

The VS-ST083S12PFK0L SCR is a versatile and reliable device that is used in a variety of AC control and protection applications. Its ability to regulate and control AC loads, along with its reliable overcurrent protection capabilities, make it an ideal component for a wide range of industrial automation and control systems.

The specific data is subject to PDF, and the above content is for reference