VS-ST1200C18K1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A thyristor is a four-layer semiconductor device with alternate P-type and N-type materials. It is also called a Silicon Control Rectifier (SCR). A thyristor is a solid-state electronic device that can be used as a switch, rectifier, regulator, or amplifier. The VS-ST1200C18K1 thyristor is a particular type of thyristor, specifically a 1200V Silicon Controlled Rectifier (SCR) with an 18kA current rating. This article will discuss the application field and working principle of the VS-ST1200C18K1 thyristor.

Application Field

The VS-ST1200C18K1 thyristor is primarily designed for use in high power switching applications. This device can be used in a variety of applications such as power supplies, motor drives, rectifiers, inverters, AC/DC motor control, and load switching. It can also be used for controlling large electrical loads such as electric motors, pumps, fans, compressors, and other power consuming equipment. The device is also suitable for controlling AC heater loads.

Working Principle

The VS-ST1200C18K1 thyristor works on a three-stage process. The first stage is the Forward Breakdown stage, where a voltage is applied to the device and it begins to break down. This process is called avalanche breakdown. The second stage is the Holding Current stage, where a minimum current is required in order to keep the device in the on-state. The third stage is the Reverse Recovery stage, where the current through the device is reduced and it switches to the off-state. At this stage, the stored charge is released and a reverse current is induced in the device.

In order to operate the device, a gate current must be applied to the gate terminal. This will cause the thyristor to turn on, allowing current to flow through the main terminals. The main current can then be controlled by adjusting the gate current. The VS-ST1200C18K1 thyristor is specifically designed to operate in a higher power range, allowing it to control large electrical loads.

Conclusion

The VS-ST1200C18K1 thyristor is a 1200V Silicon Controlled Rectifier (SCR) with an 18kA current rating. It is used primarily in high power switching applications, such as power supplies, motor drives, rectifiers, inverters, AC/DC motor control, and load switching. It works on a three-stage process, involving both forward and reverse current. To operate the device, a gate current must be applied to the gate terminal. With its high power rating, the VS-ST1200C18K1 thyristor can be used to control large electrical loads.

The specific data is subject to PDF, and the above content is for reference