VS-ST1230C08K0

Current - Hold (Ih) (Max):	600mA
Base Part Number:	ST1230C*K
Supplier Device Package:	A-24 (K-Puk)
Package / Case:	TO-200AC, K-PUK, A-24
Mounting Type:	Chassis Mount
Operating Temperature:	-40°C ~ 125°C
SCR Type:	Standard Recovery
Current - Non Rep. Surge 50, 60Hz (Itsm):	33500A, 35100A
Current - Off State (Max):	100mA
Series:	--
Current - On State (It (RMS)) (Max):	3200A
Current - On State (It (AV)) (Max):	1745A
Voltage - On State (Vtm) (Max):	1.62V
Current - Gate Trigger (Igt) (Max):	200mA
Voltage - Gate Trigger (Vgt) (Max):	3V
Voltage - Off State:	800V
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - SCRsA thyristor, also known as a Silicon Controlled Rectifier (SCR), is a semiconductor device which consists of four terminal layers of alternating N and P-type materials. An SCR can act as a switch both in AC and DC circuits. It is usually used as a kind of semiconductor switch or voltage regulator, as it can be turned on by a small current, and then remain in its “on” state until the applied current Goes below the threshold level.The VS-ST1230C08K0 thyristor is a Silicon Controlled Rectifier (SCR). It is an unidirectional device, which is primarily used in power electronics. This thyristor has a current rating of 30 amperes, and is available in TO-247 package. It has four terminals - anode, anode bar, cathode and gate. The anode and anode bar terminals are on the same side of the package.The working principle of the VS-ST1230C08K0 thyristor is fairly simple. The anode and anode bar terminals are connected to the positive side of the power source, while the cathode terminal is connected to the negative side. A voltage is applied between the anode and cathode terminals and a small current flows through the gate terminal. When the gate current reaches the “threshold voltage”, the thyristor switches “on” and current moves through the anode and cathode. This “on” state will remain until the applied current drops below the threshold level.The VS-ST1230C08K0 thyristor is used in a variety of applications, ranging from over-voltage, over-current, regenerative braking, and phase angle control, to AC torque control, electronic ignition and lamp protection. It is also used in DC to DC conversion, DC to AC conversion and in switching power supplies, as well as for DC motor speed control and as a solid-state relay switch. Due to its wide range of applications, the VS-ST1230C08K0 thyristor is suitable for use in industrial, commercial and home appliances.In conclusion, the VS-ST1230C08K0 thyristor is a reliable, efficient and cost-effective semiconductor device, which is primarily used in power electronics. It utilizes an SCR principle to switch “on” and “off” a current when the applied voltage reaches or drops below a specific threshold level. Moreover, its wide range of applications makes it a widely used component across various industries.

The specific data is subject to PDF, and the above content is for reference