VS-ST180C12C0

Current - Hold (Ih) (Max):	600mA
Base Part Number:	ST180C*C
Supplier Device Package:	TO-200AB, A-PUK
Package / Case:	TO-200AB, A-PUK
Mounting Type:	Chassis Mount
Operating Temperature:	-40°C ~ 125°C
SCR Type:	Standard Recovery
Current - Non Rep. Surge 50, 60Hz (Itsm):	5000A, 5230A
Current - Off State (Max):	30mA
Series:	--
Current - On State (It (RMS)) (Max):	660A
Current - On State (It (AV)) (Max):	350A
Voltage - On State (Vtm) (Max):	1.96V
Current - Gate Trigger (Igt) (Max):	150mA
Voltage - Gate Trigger (Vgt) (Max):	3V
Voltage - Off State:	1.2kV
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction:
Thyristors-SCRs (aka "Silicon Controlled Rectifiers" or SCR) are a type of power semiconductor switch which is used in various applications. The VS-ST180C12C0 is one of the best class SCRs available and is ideally suited for applications such as motor control, lighting control, and UPS systems. This article will provide a brief overview of the VS-ST180C12C0 application field and working principle.

Application Field:
The VS-ST180C12C0 is a versatile, low-power SCR ideal for controlling the flow of electricity in various applications. It is especially suited for motor control, lighting control, and UPS systems due to its fast switching times and moderate power consumption. Its large and precise gate current gives it the ability to precisely control power flow and its low impedance give it good electrical efficiency. Its high-current capacity also makes it suitable for use in high-current applications such as AC motors and short-circuit protection.

Working Principle:
The VS-ST180C12C0 SCR works in a simple two-state process. When the voltage applied to the anode (main terminal) is above the holding voltage, the SCR is off and current does not flow. When the voltage applied to the anode is below the holding voltage, current starts to flow in the SCR once it is enabled by the gate (switch control terminal). The SCR can only be enabled in this way, as the gate is electrically insulated from the anode. The current will become steady once the voltage applied to the anode rises above the holding voltage. The current will drop to zero when the voltage applied to the anode is once again below the holding voltage. This can be repeated by applying and releasing the gate voltage.

Advantages:
The VS-ST180C12C0 provides many advantages over other SCRs. Its low power consumption enables it to be used in various applications, while its fast switching time and high current capacity make it ideal for applications in motor control, lighting control, and UPS systems. Its precise gate current, low impedance, and built-in protective features make it very reliable in preventing electrical faults. Additionally, its wide operating temperature range makes it suitable for use in extreme temperatures, while its small size saves space and simplifies installation.

Conclusion:
The VS-ST180C12C0 SCR is an ideal solution for controlling the flow of electricity in various applications. Its low power consumption, fast switching times, precise gate current, reliable protective features, wide temperature range, and small size enable it to be an excellent choice for any power semiconductor switch need. The VS-ST180C12C0 can be used for motor control, lighting control, and UPS systems, making it a versatile and reliable product for any application.

The specific data is subject to PDF, and the above content is for reference