VS-ST180S06P1V

Current - On State (It (RMS)) (Max):	314A
Supplier Device Package:	TO-209AB (TO-93)
Package / Case:	TO-209AB, TO-93-4, Stud
Mounting Type:	Chassis, Stud Mount
Operating Temperature:	-40°C ~ 125°C
SCR Type:	Standard Recovery
Current - Non Rep. Surge 50, 60Hz (Itsm):	4200A, 4400A
Current - Off State (Max):	30mA
Current - Hold (Ih) (Max):	600mA
Series:	--
Current - On State (It (AV)) (Max):	200A
Voltage - On State (Vtm) (Max):	1.75V
Current - Gate Trigger (Igt) (Max):	150mA
Voltage - Gate Trigger (Vgt) (Max):	3V
Voltage - Off State:	600V
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - SCRs

VS-ST180S06P1V Application Field and Working Principle

A thyristor, commonly known as a silicon controlled rectifier (SCR), is a type of solid-state power electronic device used for controlling the flow of electricity. A thyristor is an electronic component used to switch electrical power from one circuit to another. It is used to control large amounts of electrical power because of its higher switching speed and reliability.The VS-ST180S06P1V is a high-power thyristor SCR used in various applications. It is typically used in high-voltage DC applications such as power control, motor control, and equipment power supplies. It can be used to switch large amounts of currents, up to 180A, and voltages up to 600V.The VS-ST180S06P1V consists of two main components: a thyristor and a gate. The thyristor is a four-layer semiconductor device with positive and negative terminals on both sides. It is made up of two PNPN layers, which creates a voltage divider within the device. The thyristor can be easily turned on and off by applying suitable voltages to the gate, or anode, depending on the design.The gate of a VS-ST180S06P1V is made up of a wafer of metal oxide semiconductor (MOS) gate oxide, which is used to control the conduction of the device. The MOS gate oxide is connected to a gate control or a gate driver circuit, which provides the required switching voltages for the thyristor.The working principle of a VS-ST180S06P1V is simple. When a small amount of voltage is applied to the gate, it causes a small current to flow through the thyristor. This current increases rapidly, which causes the thyristor to become conductive, allowing a large amount of current to flow through it. When the voltage is removed from the gate, the thyristor switches off, preventing the flow of current.The VS-ST180S06P1V can be used in a wide range of applications, including DC motor control, lighting dimming, electrical power control, and many other industries. It is an ideal choice for companies looking to save energy and lower costs. The VS-ST180S06P1V is designed to be efficient and reliable, and can handle high currents and voltages. It is a cost-effective and reliable solution for companies looking for a reliable and economical power control solution.

The specific data is subject to PDF, and the above content is for reference