Allicdata Part #: | VS-ST180S16P0GI-ND |
Manufacturer Part#: |
VS-ST180S16P0 |
Price: | $ 79.00 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Vishay Semiconductor Diodes Division |
Short Description: | SCR PHASE CONT 1600V 200A TO-93 |
More Detail: | SCR 1.6kV 314A Standard Recovery Chassis, Stud Mou... |
DataSheet: | VS-ST180S16P0 Datasheet/PDF |
Quantity: | 1000 |
12 +: | $ 71.81860 |
Current - Hold (Ih) (Max): | 600mA |
Base Part Number: | ST180S |
Supplier Device Package: | TO-209AB (TO-93) |
Package / Case: | TO-209AB, TO-93-4, Stud |
Mounting Type: | Chassis, Stud Mount |
Operating Temperature: | -40°C ~ 125°C |
SCR Type: | Standard Recovery |
Current - Non Rep. Surge 50, 60Hz (Itsm): | 5000A, 5230A |
Current - Off State (Max): | 30mA |
Series: | -- |
Current - On State (It (RMS)) (Max): | 314A |
Current - On State (It (AV)) (Max): | 200A |
Voltage - On State (Vtm) (Max): | 1.75V |
Current - Gate Trigger (Igt) (Max): | 150mA |
Voltage - Gate Trigger (Vgt) (Max): | 3V |
Voltage - Off State: | 1.6kV |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Thyristors - SCRs are widely used components in the electronics industry due to their ability to handle large amounts of current and voltage. The VS-ST180S16P0 is a three-phase SCR designed to provide reliable performance even under harsh conditions. It is widely used in applications such as electric motor control, welding machines, HVAC systems, and uninterruptible power supply (UPS).
The VS-ST180S16P0 is a three-phase SCR that is capable of switching up to 380A of continuous current and 1400A of peak current. It is capable of blocking voltages from 4500V to 6500V. It has an IEC 695-4-1 compliance rating of AC 120Volt which means it is suitable for use in electric motor control applications. The device is certified to operate over a temperature range of -40 to +125 Centigrade.
The working principle of an SCR is based on the controlled release of charge carriers from its PN junction. When an external gate control signal is applied to its gate terminal, the electric field between the PN junction causes current to flow through the device. This in turn releases charge carriers which forms a conducting channel across the junction. In normal operation, the voltage of the gate control signal must stay below the holding current of the SCR or else the device will latch-on and stay turned on even after the gate control voltage has been removed.
The VS-ST180S16P0 SCR is widely used in motor control applications due to its high blocking voltage and current ratings. It is commonly deployed in motor speed control, soft starter, and regenerative braking circuits where a high speed, high current switch is required. Additionally, it can be used in HVAC systems, welding machines and UPS in applications that require high triggering current and high blocking voltage. The device has a low gate trigger current and fast switching time which allows for precise control over the load.
The VS-ST180S16P0 is also popularly used in welding machines as it has the ability to sustain high in-rush currents. It is commonly used in welding machines with AC power sources. The device is also used in UPS systems for controlling the charging and discharging of the inverter batteries. The SCR is preferred over other switching devices such as BJTs and Mosfets due to its high current and voltage ratings.
In conclusion, the VS-ST180S16P0 is a three-phase SCR designed for applications requiring high current and voltage ratings. It is commonly used in motor control, welding machines, HVAC systems, and UPS where precise control and fast switching are needed. The device has a low gate trigger current and fast switching time which allows for precise control over the load. Furthermore, it has an IEC 695-4-1 certification rating of AC 120Volt which makes it suitable for use in electric motor control applications.
The specific data is subject to PDF, and the above content is for reference
THYRISTOR 600V 12A TO220SCR 600V 18.8A S...
NCR100W-10L/SC-73/REEL 7" Q1/TSCR 850V 1...
SCR SENS 800V 800MA TO92-3SCR 800V 800mA...
THYRISTOR 200V 0.8A SOT54SCR 200V 800mA ...
THYRISTOR 600V 8A TO220SCR 600V 12.6A St...
THYRISTOR 600V 6A TO220SCR 600V 9.4A Sta...