VS-ST230S08P1VPBF

Current - On State (It (RMS)) (Max):	360A
Supplier Device Package:	TO-209AB (TO-93)
Package / Case:	TO-209AB, TO-93-4, Stud
Mounting Type:	Chassis, Stud Mount
Operating Temperature:	-40°C ~ 125°C
SCR Type:	Standard Recovery
Current - Non Rep. Surge 50, 60Hz (Itsm):	4800A, 5000A
Current - Off State (Max):	30mA
Current - Hold (Ih) (Max):	600mA
Series:	--
Current - On State (It (AV)) (Max):	230A
Voltage - On State (Vtm) (Max):	1.55V
Current - Gate Trigger (Igt) (Max):	150mA
Voltage - Gate Trigger (Vgt) (Max):	3V
Voltage - Off State:	800V
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

< !DOCTYPE html >< head>< title >Thyristors - SCRs< /head>< body > < h2 >VS-ST230S08P1VPBF application field and working principle < p >Thyristors are solid-state silicon switching devices with three or more terminals that can be used for various voltage and power control applications. SCRs, which are short for silicon-controlled rectifiers, are a type of thyristor and are one of the most common thyristors. The VS-ST230S08P1VPBF is an SCR rated for high surge current up to 8A and up to 200Volt < p >The main application field for the VS-ST230S08P1VPBF SCR is AC power control. SCRs are used to control the flow of power from AC sources such as main power grid, motors, or by controlling the flow of electricity to other devices. Additionally, VS-ST230S08P1VPBF can be used in high voltage applications such as dimming control, solid state switching, and relay protection. < h3 >Working principle < p >SCRs are two-terminal solid-state switching devices that are capable of conducting electricity in only one direction. The device is comprised of a gate and two terminals, an anode and a cathode, and a p-n-p-n semiconductor structure. When a gate current is applied to the device, electrons start flowing from the cathode to the anode, thus creating an electric current. This current then continues until the gate current is switched off, or the reverse voltage exceeds the breakdown voltage of the device, at which point the SCR will switch off. < p >The main advantage of SCRs is their ability to switch quickly and control power in high voltage applications. Additionally, the current is not limited by the gate current but only by the voltage of the device, which makes them suitable for controlling high power applications. SCRs are also used for controlling AC power, as the current is limited by the frequency of the AC signal, thus making them more efficient than other power control solutions. < p >The VS-ST230S08P1VPBF SCR is capable of handling higher stress levels than most SCR devices. Its maximum rating is 200V with a 8A surge current. It has a low on-state voltage drop and no reverse current leakage. Additionally, it has a high surge current capacity and torque control capability, making it ideal for switching applications in high voltage and power control circuits. < h3 >Conclusion < p >The VS-ST230S08P1VPBF is an SCR rated for high surge current up to 8A and up to 200Volt. It is mainly used for AC power control applications and has a higher surge current capacity than other devices. It has a low on-state voltage drop and no reverse current leakage, making it suitable for high power control circuits. Additionally, it has a high surge current capacity and torque control capability, making it suitable for switching applications. < /body>< /html>

The specific data is subject to PDF, and the above content is for reference